This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.

Each spring is 101,5 mm long and 21 mm large.

These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.

It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.

This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.

It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.

It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.

It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.

 

These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.

From wing root to wing tip: The patented joint system adapts to the profile of the glider type during the cleaning process.

At a glance:

• A bug wiper for all types of glider.
• Aerodynamic shape.
• Streamlined, therefore minimum resistance.
• Fiber reinforced plastics with high strength.
• No buckling and no twisting of the components.
• UV-resistant.
• Double guided cleaning fialments: cleans efficiently and glides stably.
• Rests against the profile above and below the wings during the cleaning process.
• Fast mounting.

The BWS Flexiwiper can be retrofitted to almost any glider. For all Schempp-Hirth gliders, the retrival line is routed below the wing. Only this option is available in this shop. Before ordering for another type of glider, you have to consider whether the retrieval line is routed above or below the wing.

The package includes:

• 1 left and 1 right bug wiper inclusive fialments.
• 2 x tilt bracket to fit the fuselage.
• Installation manual.

You can find spare parts and related item below.

The deflection pulley is used to eliminate friction from the Bowden cables (in mosquito cleaner systems) in the event of major directional changes of the cable to enable lower manual force/power consumption and faster cleaning.

This retrieval Line Dyneema is coated and talc-powdered.

The roll contain 25 m.

5 meter cleaning fialment are also provided !

These replacement springs are specifically designed for use with the BWS Flexiwiper system. Each set is sold as a matched pair, for the left and right Flexiwiper unit.

Important compatibility note:
These springs are not compatible with the Ventus-3 or Arcus edition 2020 Garagewipers models.