Cockpit
-
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
Fokker-safety pin for trim weights
This safety pin (or Fokker pin) is 1,5 mm and it is used to secure the cockpit weight in Schempp-Hirth gliders.from 1 € 1.34 incl. 19% VAT
€ 1.13 -
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Magnet for Ventus-2c, Discus-c and Double seater canopy closing mecanism
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00 -
Splint bolt for the Duo Discus and Nimbus-4D brake handles
This bold is 6h11x28 mm, DIN 1434 / ISO 22341 and galvanized.
It is at the level of the pilot stick both front and back in the Duo Discus and the Nimbus-4D. With time, it can get rusty.
It is sold here with its splint: 1,6 x 16, DIN 94 / ISO 1234 galvanized.
from 1 € 0.83 incl. 19% VAT
€ 0.70 -
![BWS-1015_Montageschlitten_Typ_4[1].jpg](/uploads/tx_aimeos/1.d/preview/0/c/0c02a99e_bws-1015_montageschlitten_typ_4-1.webp?v=20240426140020)
BWS Mounting plate Nr. 4 for Flexiwiper Winch in double seaters
The mounting plate 4 is specifically designed for the winch to be installed near the back seat pilot feet on the left side.
Please look carefully at the picture.
If you prefer to install it on the right side, you will need the mounting plate Nr. 3.
from 1 € 32.13 incl. 19% VAT
€ 27.00 -
![BWS_Elektrowinde_Produktset_Doppelsitzer[1].jpg](/uploads/tx_aimeos/1.d/preview/6/3/632f31cb_bws_elektrowinde_produktset_doppelsitzer-1.webp?v=20240426121105)
![BWS-Installation-set-Doppelsitzer[1].jpg](/uploads/tx_aimeos/1.d/preview/3/a/3a61b4b5_bws-installation-set-doppelsitzer-1.webp?v=20240426121105)
BWS Electric Winch for double seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optionnal, please contact us).
- It is sold here with the mounting type 1, the most versatil one. However, if you want to install the winch near the feet of the backseat pilot, you may want to look also to the mounting plate Nr. 3 and Nr. 4.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1
- 2 x Double switch for instrument panel mounting
- Installation kit double seater
- Installation and operating manuals
You can find spare parts, other mounting plates and related items below.
from 1 € 2,105.11 incl. 19% VAT
€ 1,769.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.