Solo 2625-01i
-
Water pump for SOLO 2625
This water pompe is used for all the SOLO engines 2625.from 1 € 652.24 incl. 19% VAT
€ 548.10 -
V-belt for Ventus-3M SOLO 2625-01i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 225
from 1 € 328.94 incl. 19% VAT
€ 276.42 -
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 208.23 incl. 19% VAT
€ 174.98 -
Ignition coil for Solo 2625 type "i" from PVL
The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.from 1 € 192.22 incl. 19% VAT
€ 161.53 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 121.42 incl. 19% VAT
€ 102.03 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 88.33 incl. 19% VAT
€ 74.23 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Spark plug connector 5k Ohm
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part used to be black. The old model is no longer available and it is replaced by this new reference.
from 1 € 52.59 incl. 19% VAT
€ 44.19 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 23.53 incl. 19% VAT
€ 19.77 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 20.72 incl. 19% VAT
€ 17.41 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.