Control Connections, Secure ties, Nicopress and Thimble
-
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30 -
Wedekind safety device KIT
Kit to secure l'hotellier connector for gliders with manual control hookups.
It cannot be used for the wing extension.
It is sold by the unit and the EASA Form 1 is included.
from 1 € 95.66 incl. 19% VAT
€ 80.39 -
Safety springs for L'Hotellier
Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.
The EASA Form 1 is included when needed.
from 1 € 11.90 incl. 19% VAT
€ 10.00 -
Hydraulic fitting straight connection for Magura system
This connection fitting (Tost p/n 075830) is in aluminium, with standard screwing JIC04 .
This system is used for the Ventus-2c, Discus-2b and Duo Discus which are using the 5" Classic wheel from TOST with a Magura cylinder brake.
from 1 € 7.97 incl. 19% VAT
€ 6.70 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw, washer and lock nut can be added as an option.
The EASA form one is included.
from 1 € 5.46 incl. 19% VAT
€ 4.59 -
Hollow screw MS 4 for Magura system
This screw is used for the Ventus-2c with a 5" Classic wheels from TOST and a Magura cylinder brake.
It is 25 mm long and the head size is 14 mm.
from 1 € 1.55 incl. 19% VAT
€ 1.30 -
Spring lock nut, M10 used on landing gears
This is a galvanized, spring-loaded, self-locking hex nut in M10 size, manufactured to the SSB 003 specification with an FK4 flat design and a 17 mm wrench size.
It is used on the landing gear of nearly all Schempp-Hirth gliders, for the shock absorber and/or the drag strut.
from 1 € 1.29 incl. 19% VAT
€ 1.08 -
Nicopress-Stop sleeve 3,0-3,5 mm
Nicopress-Stop sleeve 3,0-3,5 mm, NT283M / n° 28-3-M.
It is 14 x 12 x 8 mm.
from 1 € 1.04 incl. 19% VAT
€ 0.87 -
Thimble 3,5 mm galvanized
Thimble 3,5 mm galvanized.
It is 32 x 17 x 6 mm.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Nicopress-Stop sleeve 2,5 mm
Nicopress-Stop sleeve 2,5 mm, NTG282G-100.
It is 10 x 9 x 6 mm.
from 1 € 0.67 incl. 19% VAT
€ 0.56 -
Nicopress-Stop sleeve 1,5-1,7mm
Nicopress-Stop sleeve 1,5-1,7mm, NTS011C (round).
It is 5 x 5 x 5 mm.from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Lock nut M6 TRELOC, DIN 439 galvanized
from 1 € 0.38 incl. 19% VAT
€ 0.32 -
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Nicopress-oval sleeve 1,5-2 mm
Nicopress-oval sleeve 1,5-2 mm, ref : NT281C-A or N° 28-1-C.
It is 10 x 6 x 4 mm.
from 1 € 0.30 incl. 19% VAT
€ 0.25 -
Thimble 2,5 mm galvanized
Thimble 2,5 mm galvanized.
It is 27 x 15 x 5 mm.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Safety ring-spring steel, DIN471, size 12
This safety ring-spring steel, DIN471, size 12 is used to secure the tailwheel axle of, almost, all Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.