Cockpit
-
Spring for rudder pedal adjustment
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanism used to included a spring. It is now replace by a gummi band.
With the kit B40-3235, you can upgrade the old sytem to the newest one.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Screw for the seat pan
This oval countersunk head screw is used for the seat pan.
It is size M 5 x 16.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Cup washer for the seat pan
These cup washers are used for the bucket seat.
It is size M6 and its dimensions are 13 x 13 x 3 mm.
Tip: For a nicer finish, use these M6 washers with M5 screws (See suggested products).
from 1 € 0.26 incl. 19% VAT
€ 0.22 -
Roll pin for trim
Roll pin DIN 1481 / ISO 8752 stainless.
They are (mainly) used to in trim of the Arcus, Duo Discus XL and Nimbus-4DL.
There is two models : On gliders produced after April 2015, you will probably need the 2 x 16 mm model. For the older glider you will need to use the 2x14 mm roll pins. Please have a look in your glider to confirm which models you need.
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
DZUS S-washer
This washer is used with the DZUS-quick fastener pin. It is size 6, its diameter is 12 mm and it is made of plastic.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Blue handgrip for airbrake handle
This handle is made of plastic. It is 75 mm long and its diameter is 25 mm.
It is used for the airbrake handle of almost all Schempp-Hirth gliders.
from 1 € 0.51 incl. 19% VAT
€ 0.43 -
Splint bolt for the Duo Discus and Nimbus-4D brake handles
This bold is 6h11x28 mm, DIN 1434 / ISO 22341 and galvanized.
It is at the level of the pilot stick both front and back in the Duo Discus and the Nimbus-4D. With time, it can get rusty.
It is sold here with its splint: 1,6 x 16, DIN 94 / ISO 1234 galvanized.
from 1 € 0.83 incl. 19% VAT
€ 0.70 -
Black grip
This handle is used for the landing gear grip of all moderne single seaters (except Ventus-3). It is also the flap grip for the first Arcus and for the Ventus b and c. For those two latest, it must be adapted, by cutting a few centimeters of it.
It is 99 mm long and 24 mm at the largest.
from 1 € 1.02 incl. 19% VAT
€ 0.86 -
Fokker-safety pin for trim weights
This safety pin (or Fokker pin) is 1,5 mm and it is used to secure the cockpit weight in Schempp-Hirth gliders.from 1 € 1.34 incl. 19% VAT
€ 1.13 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Black T-handle
from 1 € 3.34 incl. 19% VAT
€ 2.81 -
elevator-trim blade spring for Arcus, all Duo Discus, all Nimbus-4D and all Discus
This spring is used for the trim of the Arcus, Duo Discus XL, Nimbus-4DL and all the Discus from the Discus a to the Discus-2c.
It is 25mm lage and the legs are 40mm long. The central part is 12,5mm.
Some glider need roll pins. They are not included but they can be baught individaly (see the suggested products).
from 1 € 4.65 incl. 19% VAT
€ 3.91 -
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Gasket for canopy frame of the Double Seaters
This gasket is used for the canopy of the Duo Discus and the Arcus.
It is sold by the meter.
from 1 € 5.22 incl. 19% VAT
€ 4.39 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
Yellow T-handle, for tow-hook actuation
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Landing gear guide plate
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
Magnet for Ventus-2c, Discus-c and Double seater canopy closing mecanism
from 1 € 7.83 incl. 19% VAT
€ 6.58
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.