Tail
-
Washer Ø4,3xØ20x1,25 DIN 522 for the fin tank dump valve
This washer is used for the tail ballast dump valve of most of the Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Safety ring-spring steel, DIN471, size 12
This safety ring-spring steel, DIN471, size 12 is used to secure the tailwheel axle of, almost, all Schempp-Hirth gliders.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Rubber washer 19x3 mm for the fin tank dump valve
This rubber washer ensures the sealing of the tail ballast of most of the Schempp-Hirth gliders.
It is advisable to replace it every 4-6 years to avoid water leaks.from 1 € 0.82 incl. 19% VAT
€ 0.69 -
Washer Ø12,1XØ17X1,5 for the tailwheel axle
This washer is used for some Schempp-Hirth tailwheel axle with the original 200x50 with or without led.
It is Ø12,1XØ17X1,5.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw, washer and lock nut can be added as an option.
The EASA form one is included.
from 1 € 5.46 incl. 19% VAT
€ 4.59 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Tailwheel tube 200x50 with 90° valve
This tube is for all 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
Brass bushing for the lower rudder framework fin of the Ventus a, b, and c and Discus a and b
This brass bushing is part of the lower framework of the rudder fin on Ventus a, b and c, and the Discus a and b.
Careful: on rare cases, gliders need a slightly larger head: 2 mm instead of 1 mm (see picture). Please look carefully at your actual part to buy the same model. If you need the 2 mm version, please contact us.
On more modern gliders the diameter of the head is 16 mm instead of 14 mm. You cannot use one for the other.
from 1 € 8.03 incl. 19% VAT
€ 6.75 -
Distance washer for mainwheel
This washer is 14 x 2 x 32 mm and it is used for the main wheel of almost all Schempp-Hirth gliders.from 1 € 8.10 incl. 19% VAT
€ 6.81 -
Brass bushing for lower rudder framework fin of the Discus-2, Ventus-2, Ventus-3 Sport, Duo Discus and some Arcus
This brass bushing is part of the lower framework of the rudder fin on Ventus-2, Discus-2, Ventus-3 sport, all Duo Discus and Arcus (except Arcus M).
Careful: on rare cases, gliders need a slightly larger head: 2 mm instead of 1 mm (see picture). Please look carefully at your actual part to buy the same model. If you need the 2 mm version, please contact us.
On older gliders the diameter of the head is 14mm instead of 16mm. See bellow the suggested products.
from 1 € 12.36 incl. 19% VAT
€ 10.39 -
Tesa foam for horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
Description: Tesa foam 9 x 4 mm, 10 m by roll.
For a simple installation, you can instead buy premade form that can be easily adapted to single seater and double seater.
from 1 € 13.16 incl. 19% VAT
€ 11.06 -
Single seater horiz. tailplane sealing for Ventus-3 Sport
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus-2a, -2b and the Ventus-3 Sport. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 13.52 incl. 19% VAT
€ 11.36 -
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Single seater horiz. tailplane sealing for all Discus-2, Ventus-2 and the Ventus-3 performance
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus, Ventus-2c and Ventus-3 Performance. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 16.77 incl. 19% VAT
€ 14.09 -
Distance washer for tailwheel
This washer is 16 x 2 x 4,5 mm and it is used for the tail wheel
from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Distance washer for tailwheel
This washer is 16 x 2 x 5,5 mm and it is used for the tail wheel.from 1 € 17.62 incl. 19% VAT
€ 14.81
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.