Engine
-
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T
Two models exist, with or without a base, please choose the model who is already on your glider.
They are 10 mm high.
They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 14.03 incl. 19% VAT
€ 11.79 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
Rain protection cap for spark plug
This piece is used to protect the spark plug from the rain in the SOLO 2350 engine.
SOLO spare part n° 00 84 203
from 1 € 4.01 incl. 19% VAT
€ 3.37 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.25 incl. 19% VAT
€ 4.41 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.04 incl. 19% VAT
€ 5.92 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Ring buffer for SOLO 2350
SOLO Silent block bush, spare part n° 00 94 240
It is 14 mm large and its diameter is 37 mm.
from 1 € 14.93 incl. 19% VAT
€ 12.55
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.