Main landing Gear and Front Wheel
-
Brake pads Beringer ZEA01
These pads are used for the Beringer brakes of the Ventus-2, Discus-2, Duo Discus XL and Arcus.
We advise you to replace the pads before the thickness of friction material reachs 1.5 mm. For more information, you can consult the maintenace manual from Beringer.
A package contains the two pads used for one wheel.
from 1 € 75.95 incl. 19% VAT
€ 63.82 -
Brake pads for Cleveland caliper 30-9
These brake lining (Tost p/n 075865) are used on brake assembly 30-9.
It can be mounted to 4′′, 5′′ and 6′′ disk brake wheels of the series Penta, Tria and Classic and on the original Cleveland brakes- wheel system.
Different system has been used and several TN have been approved. Please look carefully to your brakes and order similar brake pad.
from 1 € 72.08 incl. 19% VAT
€ 60.57 -
Hydraulic fitting straight connection for Magura system
This connection fitting (Tost p/n 075830) is in aluminium, with standard screwing JIC04 .
This system is used for the Ventus-2c, Discus-2b and Duo Discus which are using the 5" Classic wheel from TOST with a Magura cylinder brake.
from 1 € 7.97 incl. 19% VAT
€ 6.70 -
Polyflex-hose Type 2010N for Duo Discus xL Brakes (Magura system)
This hose is 2200 mm long.
It is used for the Duo Discus x und xL as well as the first Arcus which are using the 5" Classic wheels from TOST with a Magura cylinder brake.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
from 1 € 23.82 incl. 19% VAT
€ 20.02 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Landing gear door hinge for single seater
These hinges are used to fix the landing gear door of almost all single seater.
Their dimensions are: 30 x 30 x 0,8 mm
The countersunk screws (fuselage side) and countersunk-head rivet with their washers (door side) can be ordered as an option.
from 1 € 1.87 incl. 19% VAT
€ 1.57 -
Landing gear retraction lever
This is part, with the fork, of the landing gear retraction system of the Discus, Discus-2, Ventus and Ventus-2 (except for the Ventus-2cxa and for all the fuselages "a"). It is also used for the Nimbus-2, -3 and -4 single seater and for the mini-Nimbus.
This mechanism also requires a steel bushing and an axle which are sold separately.
from 1 € 236.57 incl. 19% VAT
€ 198.80 -
Landing gear retraction lever, steel bushing
This is part of the landing gear retraction system of all the single seater except for the Cirrus. It is also used for the Janus, Nimbus-3D, Nimbus-4D and the Duo Discus (except DDx and DDxL).
It is 108 mm long and its diameter is 12 mm.
This mechanism also requires a main lever and an axle which are sold separately. We are selling online only the main lever used for the amajoity of the single seater. For the other one, please contact us.
from 1 € 21.69 incl. 19% VAT
€ 18.23 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 41.23 incl. 19% VAT
€ 34.65 -
Landing gear pneumatic tension spring for Duo Discus XL und Arcus with a TOST wheel
This gaz strut is 210N and it is used for the landing gear on the Arcus and Duo Discus XL.
Important: It is not adapted for Beringer wheels.
Two models exist. The pivot ball was first associated with a M5 screw, before beeing replace by a M6 screw in 2015. Please measure the diameter of the screw on the part that you are currently using, and order the same.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 189.33 incl. 19% VAT
€ 159.10 -
Landing gear pneumatic tension spring for Duo Discus XL and Arcus with Beringer wheel
This gas strut is 210N and it is used in the landing gear on the Arcus and Duo Discus xL.
This model is made for Beringer wheels. If you have a TOST wheel, we advise you to use this model.
You can order the pneumatic spring alone, without the pivot ball nor the extension here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 178.73 incl. 19% VAT
€ 150.19 -
Landing gear pneumatic tension spring for Duo Discus X
This spring is 210N and it is used in the landing gear on the Duo Discus x.
This pneumatic spring is also used for the Arcus and the Duo Discus xL which have a Beringer wheel. For these planes, the spring is associated with a specific extension. You can find the full spare-part here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 97.48 incl. 19% VAT
€ 81.92 -
Main wheel axle
This is the axle for the main landing gear of almost all Discus, Discus-2, Ventus-2 and Ventus-3.
It is 215 mm long, including a M12x1,5 head (4 mm long) and a M12 screw thread (12 mm long).
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with carbon fiber undercarriage need another axle . If you are not sure, measure the axle that is currently used or contact Schempp-Hirth spare part.
You may also want to buy the 8 mm M12x1,5 castle nut which is used to secured the axle (See suggested products).
from 1 € 70.50 incl. 19% VAT
€ 59.24 -
Main wheel axle castle nut, M12
This is the castle nut is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 8 mm, M12 x 1,5 DIN 937.
from 1 € 12.91 incl. 19% VAT
€ 10.85 -
Tube 5.00-5 (and 6.00), TR67
This tube fits 5.00 and 6.00 tyres.
Its long valve is adapted for the double seaters, except if they have a TOST Penta wheel.
It is also used for the single seater with a 5" wheel equiped with a TOST drum brakes like the Kobold 5".
You can find the tube 5.00-5, TR87, with a sort valve, in the suggested products.
from 1 € 201.11 incl. 19% VAT
€ 169.00 -
Tube 5.00-5 (and 6.00), TR87
This tube fits 5.00 and 6.00 tyres.
Its short valve is adapted for almost all single seater with a 5" wheel (except the one equipped with TOST drum brakes like the Kobold 5"). It is also used for the double seaters equipped with a TOST Penta wheel.
You can find the tube 5.00-5, TR67, with a long valve, in the suggested products.
from 1 € 159.34 incl. 19% VAT
€ 133.90 -
Tyre 5" thin (336x115) 10pr
This tire (Tost p/n 065221 ) is a special 5" made by TOST AERO for the Discus-2b, -2c, the Ventus-2c and the Ventus-3 . It is a bit smaller than a classic 5" so the tyre is not touching the landing gear box.
from 1 € 316.16 incl. 19% VAT
€ 265.68 -
Tyre 15X6.00-5 (380x150) for the double seater
This 5" tire (380x150/15X6.00-5, RB 06120 TT) is used for the double seaters.
from 1 € 471.24 incl. 19% VAT
€ 396.00 -
Tyre 4.00-4 Tost AERO 8 pr
This tire (Tost p/n 064491) is used for the the 4" wheel of the single seater (before the Ventus-2c and the Discus-2b).
from 1 € 78.90 incl. 19% VAT
€ 66.30 -
Tyre 2.80/2.50-4 for double seater nose wheel
This 2.80/2.50-4 tire is used for the front wheel of the Janus, Duo Discus, and Arcus.
Previously, a 3" tire (D 3.00-4 IND IC35 4PR) was used, but that model has been discontinued. This tire serves as a suitable replacement.
from 1 € 254.90 incl. 19% VAT
€ 214.20 -
Tube 3.00/4.00-4 (260x85)
This tube is used for the the 3" front wheel of the double seaters and the single seater 4" main wheel.
Carefull, the valve is only 32 mm long.
from 1 € 19.39 incl. 19% VAT
€ 16.29 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 2.38 incl. 19% VAT
€ 2.00 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Landing gear spring strut for all almost single seaters
This item is part of the landing gear of all the modern Schempp-Hirth single seater, with a landing gear in metall.
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with glass fiber undercarriage need another strut. It looks different but if you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 282.53 incl. 19% VAT
€ 237.42 -
Main wheel axle castle nut, M14 for double seaters
This is the castle nut is used for the main landing gear of all the Duo Discus and Arcus.
It is 8 mm, M14 x 1,5 DIN 937.
from 1 € 15.16 incl. 19% VAT
€ 12.74 -
Brake pull cable for single seaters with magura type disc
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST, with a “Magura” cylinder brake.
The brake cable measures 555 mm in length and features a 6 x 10 mm nipple.
from 1 € 13.96 incl. 19% VAT
€ 11.73 -
Kit for brake pull cable for single seater with drum brake
This comprehensive kit ensures compatibility with all single-seater gliders equipped with drum brakes and provides the necessary components for a smooth brake cable replacement.
The cable comes with a standard 5.5 mm nipple, which fits most modern gliders that have a 6.2 mm handle hole. For older models or those with larger handle holes, an additional nipple is included, suitable for handles with an 8.5 mm hole.
The kit includes:
- 1600 mm of 2 mm cable with a 5.5 x 10 mm nipple
- 1 x Nicopress oval sleeve (1.5-2 mm, NT281C-A)
- 1 x 2 mm thimble
- 1 x Nipple No. 33A
- 1 x Nipple support No. 21A (8 x 9 mm)
from 1 € 68.92 incl. 19% VAT
€ 57.92 -
Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 41.60 incl. 19% VAT
€ 34.96 -
Landing gear pneumatic tension spring for Duo Discus X
This spring is 210N and it is used in the landing gear on the Duo Discus x.
This pneumatic spring is also used for the Arcus and the Duo Discus xL which have a Beringer wheel. For these planes, the spring is associated with a specific extension. You can find the full spare-part here.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 97.48 incl. 19% VAT
€ 81.92 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Hollow screw MS 4 for Magura system
This screw is used for the Ventus-2c with a 5" Classic wheels from TOST and a Magura cylinder brake.
It is 25 mm long and the head size is 14 mm.
from 1 € 73.10 incl. 19% VAT
€ 61.43 -
Landing gear door spring for Arcus and Duo Discus XL
from 1 € 87.85 incl. 19% VAT
€ 73.82 -
Landing gear door rubber spring
This elastic maintains the landing gear doors of the double seater. Its diameter is 5 mm.
You can order it by the meter.
from 1 € 1.02 incl. 19% VAT
€ 0.86 -
Landing gear door spring
The tension spring Z-109AI is used for the single seater landing gear doors.
Its dimensions are 77 x 11 x 11 mm
from 1 € 2.17 incl. 19% VAT
€ 1.82
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.