-
Oxygen-bottle holder for gliders with engine
This oxygen bottle holder is suitable for a majority of gliders equiped with a turbo or a motor.
Please choose which holder you need according to your Oxygen-bottle diameter. It is possible to adjust the holder at +/- 2 mm.
In single-seaters, one of the screws of the support is often above the spar bridge, where the wall is relatively thin. It is therefore often necessary to add the washer B40-2218 (see suggested products).
from 1 € 228.86 incl. 19% VAT
€ 192.32 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Wing attachment bolt for Ventus-2c and Discus-2c, back
The visible part of the peg is 70,5 mm long with a 14 mm diameter. The internal part is 35 mm long, with a 40 mm diameter.
It is used on the back part of the Discus-2c and Ventus-2c wing roots.
from 1 € 93.58 incl. 19% VAT
€ 78.64 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 21.25 incl. 19% VAT
€ 17.86 -
Landing gear retraction lever, quick release axle
This is part of the landing gear retraction system of all the single seater except for the Cirrus.
It is 189 mm long with a size 10 thread on one side and a 14 mm ring on the other.
This mechanism also requires a the main lever and a steel bushing which are sold separately. We are selling online, only the main lever used for the a majority of the single seater. For the other one, please contact us.
from 1 € 41.23 incl. 19% VAT
€ 34.65 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 230.32 incl. 19% VAT
€ 193.55 -
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 114.66 incl. 19% VAT
€ 96.35 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.