Horizontal Tailplane Jct and Elevator control
-
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84 -
Horiz. Tailplane Pin, Kit.
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. The kit provides all the necessary parts to change 1 pin.
from 1 € 93.87 incl. 19% VAT
€ 78.88 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Tesa foam for horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
Description: Tesa foam 9 x 4 mm, 10 m by roll.
For a simple installation, you can instead buy premade form that can be easily adapted to single seater and double seater.
from 1 € 13.16 incl. 19% VAT
€ 11.06 -
Single seater horiz. tailplane sealing for all Discus-2, Ventus-2 and the Ventus-3 performance
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus, Ventus-2c and Ventus-3 Performance. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 16.77 incl. 19% VAT
€ 14.09 -
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Horizontal tailplane mounting tool
The Schempp-Hirth iconic tool!
from 1 € 23.11 incl. 19% VAT
€ 19.42 -
Horizontal tailplane mounting tool with extra pin for wingtip mounting
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip.from 1 € 23.78 incl. 19% VAT
€ 19.98 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 70.82 incl. 19% VAT
€ 59.51 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Single seater horiz. tailplane sealing for Ventus-3 Sport
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus-2a, -2b and the Ventus-3 Sport. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 13.52 incl. 19% VAT
€ 11.36 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00 -
Elevator transition for all Discus-2, select Ventus-2, and the Ventus-3
This part can be adapted to fit the Discus-2a, Discus-2b, Discus-2c, Ventus-2ax, Ventus-2bx, the ventus-2c, the ventus-2cx and the Ventus-3.
It measures 148 mm in width.
Please note that you will need to cut the part to ensure it fits your glider, as it is sold in an untrimmed form.
from 1 € 104.42 incl. 19% VAT
€ 87.75 -
Elevator transition for Duo Discus, Arcus and Nimbus-4D
This part can be adapted to fit the Duo Discus, Duo Discus X, Duo Discus XL, as well as the Arcus, Arcus Edition 2020, and Nimbus-4D.
It measures approximately 147 mm in width and 157 mm in length.
Please note that the part is sold in an untrimmed form, so you will need to cut it to ensure a proper fit for your glider.
from 1 € 165.68 incl. 19% VAT
€ 139.23
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.