Tail
-
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
Steerable tailwheel TOST Mini 150x30
This tailwheel Max "X/S" is designed for the Ventus-2cM and it is available as an option for the Ventus-3 Sport. It is 150x30 mm and filled with foam.
This model it isn't adapted to the Ventus_2cM carbon fork so if the wheel currently in place is less than 150 mm, please contact Schempp-Hirth spare-part service.
from 1 € 349.15 incl. 19% VAT
€ 293.40 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Steerable tailwheel "Max II" 200x50
This wheel is made by Tost for the tail of the Arcus M, Ventus-3M and the Quintus M.
It is made in two parts, and it is adapted for a 12 mm axle and 200 x 50 tyres and tubes. In aluminium, silver anodized, it weights less than a kilo.
from 1 € 299.05 incl. 19% VAT
€ 251.30 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Rubber skid for all gliders
This rubber skid is 330 x 70mm and it is adapted to all Schempp-Hirth gliders including Cirrus and Nimbus.
from 1 € 248.04 incl. 19% VAT
€ 208.44 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
Fin tank valve for Arcus, Duo Discus xL and Nimbus-4DL
This is the complete tank dump valve assembly. It is used for Arcus, Duo Discus xL and Nimbus-4DL.
Single seaters have another model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our spare part team.
from 1 € 190.19 incl. 19% VAT
€ 159.82 -
Elevator transition for Duo Discus, Arcus and Nimbus-4D
This part can be adapted to fit the Duo Discus, Duo Discus X, Duo Discus XL, as well as the Arcus, Arcus Edition 2020, and Nimbus-4D.
It measures approximately 147 mm in width and 157 mm in length.
Please note that the part is sold in an untrimmed form, so you will need to cut it to ensure a proper fit for your glider.
from 1 € 165.68 incl. 19% VAT
€ 139.23 -
Tail wheel axle distance washer kit
This kit includes a wide selection of spacer washers for tail wheel axle, measuring 16 x 2 mm with widths ranging from 1.5 to 6 mm. It is particularly useful if you plan to switch from a classic tailwheel to a mini version. Compatible with most gliders, except for the Arcus M, Ventus-3M, and Cirrus.from 1 € 121.43 incl. 19% VAT
€ 102.04 -
Elevator transition for all Discus-2, select Ventus-2, and the Ventus-3
This part can be adapted to fit the Discus-2a, Discus-2b, Discus-2c, Ventus-2ax, Ventus-2bx, the ventus-2c, the ventus-2cx and the Ventus-3.
It measures 148 mm in width.
Please note that you will need to cut the part to ensure it fits your glider, as it is sold in an untrimmed form.
from 1 € 104.42 incl. 19% VAT
€ 87.75 -
Horiz. Tailplane Pin, Kit.
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. The kit provides all the necessary parts to change 1 pin.
from 1 € 93.87 incl. 19% VAT
€ 78.88 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 70.82 incl. 19% VAT
€ 59.51 -
Tailwheel axle
This axle is adapted to the most used Schempp-Hirth tailwheels: the original 200x50 with or without led.
It does not fit the steerable tail wheel of the Arcus M and the Ventus-3M. For these gliders, you must use the reference B40-2946.
It is 98 mm long and 17 mm in diameter.
It is sold with the safety ring-spring (L01-0663).
A washer, that can be necessary on some gliders, is sold as an option.
from 1 € 50.21 incl. 19% VAT
€ 42.19 -
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Tailwheel tyre 200x50
This 6PR tire from TOST AERO is used for all the 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 34.15 incl. 19% VAT
€ 28.70 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.