Shop

Engine

products 1-21 of 58
Products per page
Sort by
New Sale

Limit switch IX02 0815

This proximity switch (ref  IX02 0815) is used for the automatic propeller brake in the Arcus M. 

It is not addapted to the Arcus M edition 2020.

This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.

 
from 1 € 140.04 incl. 19% VAT
€ 117.68
New Sale

Fuel filters for Ventus-3M

These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.
from 1 € 121.42 incl. 19% VAT
€ 102.03
New Sale

Tooth belt for Ventus-2cM

This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.
from 1 € 691.66 incl. 19% VAT
€ 581.23
New Sale

Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)

In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...

If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).

This kit is not adapted for the SOLO 2350c and 2350d.


from 1 € 209.39 incl. 19% VAT
€ 175.96
New Sale

Kit for 5-year-special inspection, SOLO turbo 2350 (SN after 338)

In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...

If your engine is before SN 339, please use the kit for engine Solo 2350 (SN<339).

This kit is not adapted for the SOLO 2350c and 2350d.


from 1 € 209.39 incl. 19% VAT
€ 175.96
New Sale

Water pump for SOLO 2625

This water pompe is used for all the SOLO engines 2625.
from 1 € 652.24 incl. 19% VAT
€ 548.10
New Sale

Ignition coil for Solo 2625 from Ducati

This ignition box from Ducati is used in the Solo 2625-01 and 2625-02 but not for the "i" version. The Solo 2625-01i and 2625-02i need the ignition coil from PVL.

The cable is included.


from 1 € 583.10 incl. 19% VAT
€ 490.00
New Sale

Ignition coil for Solo 2625 type "i"  from PVL

The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.
from 1 € 192.22 incl. 19% VAT
€ 161.53
New Sale

Exhaust gasket for Solo 2625

Gasket exhaust is used for the SOLO engines 2625.

It is 68,5 x 48 x 2 mm.

It is sold by the unit.
from 1 € 23.53 incl. 19% VAT
€ 19.77
New Sale

Spark plug B7HS

This spark plug is used for all SOLO engines.
from 1 € 5.89 incl. 19% VAT
€ 4.95
New Sale

Cooling water gasket for the cylinder head of SOLO 2625

This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.

It is 51 x 32 x 1,5 mm.

Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58
New Sale

Karcoma fuel filter

This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.

It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22
New Sale

O-ring  Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69
New Sale

Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T

Two models exist, with or without a base, please choose the model who is already on your glider.

They are 10 mm high.

They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19
from 1 € 3.80 incl. 19% VAT
€ 3.19
from 1 € 14.03 incl. 19% VAT
€ 11.79
New Sale

Spark plug connector 5k Ohm

This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.

SOLO spare part n° 23 00 701 V1

This part used to be black. The old model is no longer available and it is replaced by this new reference.
from 1 € 52.59 incl. 19% VAT
€ 44.19
New Sale

Ring buffer for SOLO 2350

SOLO Silent block bush, spare part n° 00 94 240

It is 14 mm large and its diameter is 37 mm.
from 1 € 14.93 incl. 19% VAT
€ 12.55
New Sale

Decompression retraction sheet, for SOLO 2350

This part is 148 x 20 x 20 mm.

It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000.  The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.

It is sold with its brass bushings, 8x1x2,5 mm.


from 1 € 39.03 incl. 19% VAT
€ 32.80
New Sale

V-belt for Arcus M SOLO 2625-02i

This item is 1 set of 5 pieces.

SOLO spare-part n° 00 57 224

 
from 1 € 273.51 incl. 19% VAT
€ 229.84
New Sale

Fuel hose

This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.

It is sold my the meter.
from 1 € 20.72 incl. 19% VAT
€ 17.41
New Sale

Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM

The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.

It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.

Please refer to the maintenance manual for the installation.
from 1 € 66.70 incl. 19% VAT
€ 56.05
New Sale

Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.

This silent block is used for the cooler of the Arcus M,  Ventus-3 and Quintus engine.

The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.


from 1 € 3.06 incl. 19% VAT
€ 2.57
products 1-21 of 58
Products per page
Sort by

Help, my spare part is not yet in the shop!

If you cannot find the item you want please use the spare-part form and we will come back to you shortly.