Shop

Controls

products 1-9 of 111
Products per page
Sort by
New Sale

Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake

This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.

The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.

Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.

The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69
New Sale

Pneumatic tension spring for the Duo Discus x and xL airbrake

This 300N gas strut is located in the fuselage. It connects to the airbrake drive shaft in the Duo Discus x and xL.


If the airbrakes become very hard to operate, it may be that this gas strut needs to be replaced.
from 1 € 27.06 incl. 19% VAT
€ 22.74
New Sale

Elevator-bell crank

This item is part of the horizontal tailplane actuation system of all modern Schempp-Hirth gliders.

Please note that the Cirrus is equipped with a slightly different model. If you are unsure which model you need, please contact Schempp-Hirth Spare Part.


from 1 € 83.73 incl. 19% VAT
€ 70.36
New Sale

Tension spring for Discus trim system

Tension Spring for the Discus-2 Trim System, Part No.: RZ-123 I

Tension spring for the trim system of the Discus-2 series. 3 springs are required per aircraft.

It is  Ø 1,6 x 14,1 x 59 mm

 
from 1 € 2.59 incl. 19% VAT
€ 2.18
New Sale

Rod end bearing 10c6 M8x58

Rod end bearing with a 10c6 head and M8x58 length body.

Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 15.90 incl. 19% VAT
€ 13.36
New Sale

Landing gear guide plate for Duo Discus xL and Arcus

This grey PVC plate is used as a guide for the Duo DiscusxL and xLT and Arcus.

Dimensions: 233×25 mm.

Please note: the model used for the Duo Discus and Nimbus-4D is shorter (ref. B40-3305). You can find it in the suggested products below.
from 1 € 13.47 incl. 19% VAT
€ 11.32
New Sale

Landing gear guide plate for Duo Discus and Nimbus-4D

This grey PVC plate is used as a guide for the Duo Discus and Nimbus-4D.

Dimensions: 220 × 25 mm.

Please note: the model used for the Duo Discus XL, Arcus, and Nimbus-4DL is longer (ref. B40-3306). You can find it in the suggested products below.
from 1 € 21.27 incl. 19% VAT
€ 17.87
New Sale

Hydraulic fitting connection for Polyflex tube

This connection fitting is used, sometime, to the Polyflex hose of the classic Duo Discus which are using the Classic wheel from TOST with a Magura cylinder brake.
from 1 € 4.16 incl. 19% VAT
€ 3.50
New Sale

Bowden cable 5,3x4,4x3,0 mm - 80 cm

This bowden cable is 5,3 x 4,4 x 3,0 mm. It can also be referred to as 5.51.0000.022.

It is 80 cm and includes 2 cable end caps. To order a bigger quantity see the 

This cable is often used for the wheel brake systems. Please refer to your maintenance manual for the type of cable you need and how to make the connections.

 
from 1 € 4.76 incl. 19% VAT
€ 4.00
products 1-9 of 111
Products per page
Sort by

Help, my spare part is not yet in the shop!

If you cannot find the item you want please use the spare-part form and we will come back to you shortly.