Wing roots
-
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 13.83 incl. 19% VAT
€ 11.62 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 21.25 incl. 19% VAT
€ 17.86 -
Automatic control connection for single seaters (exc. Ventus-3)
This bell crank is used on Discus b, Discus c, Discus-2a, -2b, -2c, Ventus b, Ventus c and Ventus-2a, -2b, -2c.
You may need to change them according to the TN 349-43.
You can buy the screws and bolts needed to change the part as an option. This option is currently un available but will be back within a few weeks.
from 1 € 373.60 incl. 19% VAT
€ 313.95 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
BWS Crank handle by Laminar Aerotec
The simple and proven solution for your bug wriper.
With its integrated damping system, it offers a smooth-run.
It is delivered with:
- 2 pieces BWS crank handles
- Mounting plate
- Installation kit
- Installation and operating manuals
You can find spare parts and related item below.
from 1 € 581.91 incl. 19% VAT
€ 489.00 -
BWS Electric Winch for all single seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optional, please contact us).
- It is sold here with the mounting type 1, the most versatil one, but a large variety of plates are available for easy and flexible installation.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1 - Suitable for almost all aircraft and installation positions. Special mounting slides (e.g. for Arcus) are also available.
- Double switch for instrument panel mounting
- Installation kit single seater
- Installation and operating manual
You can find spare parts, other mounting plates and related items below.
from 1 € 2,009.91 incl. 19% VAT
€ 1,689.00 -
BWS Electric Winch for double seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optionnal, please contact us).
- It is sold here with the mounting type 1, the most versatil one. However, if you want to install the winch near the feet of the backseat pilot, you may want to look also to the mounting plate Nr. 3 and Nr. 4.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1
- 2 x Double switch for instrument panel mounting
- Installation kit double seater
- Installation and operating manuals
You can find spare parts, other mounting plates and related items below.
from 1 € 2,105.11 incl. 19% VAT
€ 1,769.00 -
BWS Flexiwiper by Laminar Aerotec
From wing root to wing tip: The patented joint system adapts to the profile of the glider type during the cleaning process.
At a glance:
- A bug wiper for all types of glider.
- Aerodynamic shape.
- Streamlined, therefore minimum resistance.
- Fiber reinforced plastics with high strength.
- No buckling and no twisting of the components.
- UV-resistant.
- Double guided cleaning fialments: cleans efficiently and glides stably.
- Rests against the profile above and below the wings during the cleaning process.
- Fast mounting.
The BWS Flexiwiper can be retrofitted to almost any glider. For all Schempp-Hirth gliders, the retrival line is routed below the wing. Only this option is available in this shop. Before ordering for another type of glider, you have to consider whether the retrieval line is routed above or below the wing.
The package includes:
- 1 left and 1 right bug wiper inclusive fialments.
- 2 x tilt bracket to fit the fuselage.
- Installation manual.
You can find spare parts and related item below.
from 1 € 354.62 incl. 19% VAT
€ 298.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.