-
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
BWS Electric Winch for double seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optionnal, please contact us).
- It is sold here with the mounting type 1, the most versatil one. However, if you want to install the winch near the feet of the backseat pilot, you may want to look also to the mounting plate Nr. 3 and Nr. 4.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1
- 2 x Double switch for instrument panel mounting
- Installation kit double seater
- Installation and operating manuals
You can find spare parts, other mounting plates and related items below.
from 1 € 2,105.11 incl. 19% VAT
€ 1,769.00 -
BWS Electric Winch for all single seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optional, please contact us).
- It is sold here with the mounting type 1, the most versatil one, but a large variety of plates are available for easy and flexible installation.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1 - Suitable for almost all aircraft and installation positions. Special mounting slides (e.g. for Arcus) are also available.
- Double switch for instrument panel mounting
- Installation kit single seater
- Installation and operating manual
You can find spare parts, other mounting plates and related items below.
from 1 € 2,009.91 incl. 19% VAT
€ 1,689.00 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Fuel Tank for Arcus M for replacement
This item will allow you to replace the wing fuel tank of your Arcus.
from 1 € 1,482.48 incl. 19% VAT
€ 1,245.78 -
Fuel Tank for Ventus-2c(x)M for replacement
This item will allow you to replace the wing fuel tank of your Ventus-2cM and Ventus-2cxM.
from 1 € 1,482.48 incl. 19% VAT
€ 1,245.78 -
Tooth belt for Ventus-2cM
This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.from 1 € 691.66 incl. 19% VAT
€ 581.23 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Water pump for SOLO 2625
This water pompe is used for all the SOLO engines 2625.from 1 € 652.24 incl. 19% VAT
€ 548.10 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
Ignition coil for Solo 2625 from Ducati
This ignition box from Ducati is used in the Solo 2625-01 and 2625-02 but not for the "i" version. The Solo 2625-01i and 2625-02i need the ignition coil from PVL.
The cable is included.
from 1 € 583.10 incl. 19% VAT
€ 490.00 -
BWS Crank handle by Laminar Aerotec
The simple and proven solution for your bug wriper.
With its integrated damping system, it offers a smooth-run.
It is delivered with:
- 2 pieces BWS crank handles
- Mounting plate
- Installation kit
- Installation and operating manuals
You can find spare parts and related item below.
from 1 € 581.91 incl. 19% VAT
€ 489.00 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Instrument panel for Discus-2b, -2c, and Ventus-2b and -2c (2 versions)
This instrument panel is sold raw.
It would fit almost all the Discus-2b, Discus-2c and Ventus-2c, as well as a majority of the Ventus-2b.
For the oldest models, the panel is fixed to its framework by 3 inking points instead of 4 for the most recent gliders. You can choose which model you need on the drop dawn menu.
For the Ventus-2b, with 3 point please take this instrument panel, without extra space for the knees.
from 1 € 509.02 incl. 19% VAT
€ 427.75from 1 € 424.38 incl. 19% VAT
€ 356.62from 1 € 509.02 incl. 19% VAT
€ 427.75 -
Instrument panel for Discus b, Ventus b and Ventus c (2 versions)
This instrument panel is sold raw. It would fit the Discus b, Ventus b and Ventus c. You can order it with or without an extra space for the knees.
from 1 € 504.38 incl. 19% VAT
€ 423.85from 1 € 504.38 incl. 19% VAT
€ 423.85 -
KIT for fuel hose replacement at the 5-year inspection for Arcus M
This kit contains all the fuel hoses that need to be replaced during the 5 years inspection on the Arcus M.from 1 € 503.85 incl. 19% VAT
€ 423.40 -
Tyre 15X6.00-5 (380x150) for the double seater
This 5" tire (380x150/15X6.00-5, RB 06120 TT) is used for the double seaters.
from 1 € 471.24 incl. 19% VAT
€ 396.00 -
Safety harness Schroth
The seat belts SCHROTH 4-point restraint features the proven and ergonomic SCHROTH rotary actuator. It is light and comfortable, ideal for long flights.
We are selling online only the blue SCHROTH harness but it is available in dark red and black. In addition, Schempp-Hirth gliders can also be equipped with safety harness from Gadringer. If you wish to buy on of these models, please contact the Schempp-Hirth Spare Part.
from 1 € 459.34 incl. 19% VAT
€ 386.00 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 453.89 incl. 19% VAT
€ 381.42 -
Wingtip complet wheel, Lindner System, for Ventus-2c
This wingtip wheel is made for the Ventus-2c.
This system is aerodynamic and compact (212 x 95 x 59 mm). In addition it is weighting only 200 g.
It is sold by the unit.
You can to fix it with screws that are included. Look at look wing tip, the holes are 165 mm apart.
from 1 € 446.25 incl. 19% VAT
€ 375.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.