-
Back canopy hinge for Arcus, Duo Discus XL and Nimbus-4DL
This hinge is made of aluminium. It is different than the front hinge made of carbon fiber.
from 1 € 31.08 incl. 19% VAT
€ 26.12 -
Front canopy hinge for Arcus, Duo Discus XL and Nimbus-4DL
This hinge is for the canopy of Arcus, Duo Discus xL and Nimbus-4DL. This front hinge is in carbon fiber and will break in case of evacuation. If it happens accidentally, it is possible to replace it.
Note: the hinge at the back is different.
from 1 € 54.06 incl. 19% VAT
€ 45.43 -
Canopy hinge for Discus, Discus-2, Ventus, Ventus-2, Ventus-3 Sport, Duo Discus, Duo Discus X and Nimbus-4D
This hinge is in carbon fiber.
Note: The rear hinge can be different. To order it, please contact Schempp-Hirth spare part.
from 1 € 27.93 incl. 19% VAT
€ 23.47 -
Blue handgrip for airbrake handle
This handle is made of plastic. It is 75 mm long and its diameter is 25 mm.
It is used for the airbrake handle of almost all Schempp-Hirth gliders.
from 1 € 0.51 incl. 19% VAT
€ 0.43 -
Yellow T-handle, for tow-hook actuation
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Black grip
This handle is used for the landing gear grip of all moderne single seaters (except Ventus-3). It is also the flap grip for the first Arcus and for the Ventus b and c. For those two latest, it must be adapted, by cutting a few centimeters of it.
It is 99 mm long and 24 mm at the largest.
from 1 € 1.02 incl. 19% VAT
€ 0.86 -
Flap latch-in element for Ventus-2c, -2cx and -2bx
This part is used for the notching of the flaps of the Ventus-2bx, Ventus-2c and Ventus-2cx.
It is 146 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 89.75 incl. 19% VAT
€ 75.42 -
Landing gear guide plate
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Brass bushing for the lower rudder framework fin of the Ventus a, b, and c and Discus a and b
This brass bushing is part of the lower framework of the rudder fin on Ventus a, b and c, and the Discus a and b.
Careful: on rare cases, gliders need a slightly larger head: 2 mm instead of 1 mm (see picture). Please look carefully at your actual part to buy the same model. If you need the 2 mm version, please contact us.
On more modern gliders the diameter of the head is 16 mm instead of 14 mm. You cannot use one for the other.
from 1 € 8.03 incl. 19% VAT
€ 6.75 -
Kit for rudder pedal adjustment
This kit contains all you need to replace the pedal adjustment mechanism, including the instructions.
It is made for the Ventus b, Ventus c, Ventus-2, Discus, Discus-2, Nimbus-4, Duo Discus and the Arcus.
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanisme included a spring. It is now replace by a gummi band. With this kit, you can upgrade the old sytem to the newest one.
from 1 € 51.46 incl. 19% VAT
€ 43.24 -
Green ball knob for trim
This handle for the trim is a format 25 mm, M6. It is made in aluminium and green powdered.
from 1 € 18.34 incl. 19% VAT
€ 15.41 -
Pilot stick handle, 19,3 mm
This pilot stick handle is made by Air Ergo Leki for the Schempp-Hirth 19,3 mm diameter control sticks.
3 adaptors are provided for the folowing settings: No SC, SC switch or SC button.
from 1 € 52.23 incl. 19% VAT
€ 43.89 -
Pilot stick bag for single seaters and double seater rear seat
This fabric bag is placed around the pilot stick of all single seater and at the rear seat of the double seaters. This model is not adapted for the Quintus, the Arcus edition 2020 and the Ventus-3. You can find the model for the front seat of the double seater in the suggested products.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Pilot stick bag for double seater front seat
This fabric bag is placed around the pilot stick of the front seat of the double seaters. This model is not adapted for the Arcus edition 2020.
It is a safety feature, preventing things going inside the controls. If it get old or damaged you can replace it.
It is sold without frame.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
DZUS S-washer
This washer is used with the DZUS-quick fastener pin. It is size 6, its diameter is 12 mm and it is made of plastic.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07 -
Horizontal tailplane mounting tool with extra pin for wingtip mounting
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip.from 1 € 23.78 incl. 19% VAT
€ 19.98 -
Horizontal tailplane mounting tool, with Ventus-3 extras.
The Schempp-Hirth iconic tool with an extra pin to dismantle the wingtip and an extra tool for the ballast plugs.from 1 € 70.82 incl. 19% VAT
€ 59.51 -
Wing extension mounting tool
This tool allows you to assemble Discus-2c, Ventus-2c and Ventus-3 wing extensions.
from 1 € 25.38 incl. 19% VAT
€ 21.33 -
Pneumatic tension spring 250 N for instr. panel
This 250 N gas strut is 222 mm long.
It is used for the foldable instrument panel of the Ventus-2a, Discus-2a and the Ventus-2cxa before the year 2009.
Some Ventus-2cxa before 2009 may have been modified. Please have a close look at the one installed in your glider. If the diameter is 20 mm and it is longer than 23 mm, you need the reference L03-0124. Please contact our spare part team.
from 1 € 46.15 incl. 19% VAT
€ 38.78
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.