Spare parts
-
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69 -
elevator-trim blade spring for Arcus, all Duo Discus, all Nimbus-4D and all Discus
This spring is used for the trim of the Arcus, Duo Discus XL, Nimbus-4DL and all the Discus from the Discus a to the Discus-2c.
It is 25mm lage and the legs are 40mm long. The central part is 12,5mm.
Some glider need roll pins. They are not included but they can be baught individaly (see the suggested products).
from 1 € 4.65 incl. 19% VAT
€ 3.91 -
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Shim washer for 10 mm diameter wing bolt
These washers are 14x9,8x0,5 mm.
They are made for the wing bolt that have a 10 mm diameter. This includes the wing extension bolt of all Arcus, all Duo Discus, the Nimbus-3, -3D, -4 and -4D, the Janus, the Discus-b, the Discus-2a and -2b and the Ventus c. It is also the case for the winglet bolt of the Discus, the Standard Cirrus, the Ventus-2a and the Ventus-2b.
These washers internal diameter is 9,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
They are sold in a kit of 4.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Gasket for canopy frame of the Double Seaters
This gasket is used for the canopy of the Duo Discus and the Arcus.
It is sold by the meter.
from 1 € 5.22 incl. 19% VAT
€ 4.39 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.25 incl. 19% VAT
€ 4.41 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw, washer and lock nut can be added as an option.
The EASA form one is included.
from 1 € 5.46 incl. 19% VAT
€ 4.59 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Yellow T-handle, for tow-hook actuation
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Bowden cable 5,3x4,4x3,0 mm
This bowden cable is 5,3 x 4,4 x 3,0 mm. It can also be referred to as 5.51.0000.022.
It is sold by the meter and includes 2 cable end caps.
This cable is often used for the wheel brake systems. Please refer to your maintenance manual for the type of cable you need and how to make the connections.
from 1 € 6.27 incl. 19% VAT
€ 5.27 -
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Landing gear guide plate
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.04 incl. 19% VAT
€ 5.92 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
Tailwheel tube 200x50 with 90° valve
This tube is for all 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Magnet for Ventus-2c, Discus-c and Double seater canopy closing mecanism
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Hydraulic fitting straight connection for Magura system
This connection fitting (Tost p/n 075830) is in aluminium, with standard screwing JIC04 .
This system is used for the Ventus-2c, Discus-2b and Duo Discus which are using the 5" Classic wheel from TOST with a Magura cylinder brake.
from 1 € 7.97 incl. 19% VAT
€ 6.70 -
Brass bushing for the lower rudder framework fin of the Ventus a, b, and c and Discus a and b
This brass bushing is part of the lower framework of the rudder fin on Ventus a, b and c, and the Discus a and b.
Careful: on rare cases, gliders need a slightly larger head: 2 mm instead of 1 mm (see picture). Please look carefully at your actual part to buy the same model. If you need the 2 mm version, please contact us.
On more modern gliders the diameter of the head is 16 mm instead of 14 mm. You cannot use one for the other.
from 1 € 8.03 incl. 19% VAT
€ 6.75 -
Distance washer for mainwheel
This washer is 14 x 2 x 32 mm and it is used for the main wheel of almost all Schempp-Hirth gliders.from 1 € 8.10 incl. 19% VAT
€ 6.81 -
Water filler cap sealing for Ventus-3
This sealing is made for the Ventus-3 sealing caps.
Its diameter is 26 mm and the sealing is 4,0mm thick.
from 1 € 8.19 incl. 19% VAT
€ 6.88 -
Flap handle for some Ventus-2c and the Ventus-3
from 1 € 8.45 incl. 19% VAT
€ 7.10 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Hexagon screw 06021,5 , LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.from 1 € 11.25 incl. 19% VAT
€ 9.45 -
Safety springs for L'Hotellier
Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.
The EASA Form 1 is included when needed.
from 1 € 11.90 incl. 19% VAT
€ 10.00 -
Brass bushing for lower rudder framework fin of the Discus-2, Ventus-2, Ventus-3 Sport, Duo Discus and some Arcus
This brass bushing is part of the lower framework of the rudder fin on Ventus-2, Discus-2, Ventus-3 sport, all Duo Discus and Arcus (except Arcus M).
Careful: on rare cases, gliders need a slightly larger head: 2 mm instead of 1 mm (see picture). Please look carefully at your actual part to buy the same model. If you need the 2 mm version, please contact us.
On older gliders the diameter of the head is 14mm instead of 16mm. See bellow the suggested products.
from 1 € 12.36 incl. 19% VAT
€ 10.39 -
![BWS-2009_Feder_für_Flexiputzer,_lo_ru[1].jpg](/uploads/tx_aimeos/1.d/preview/d/d/dd8babc5_bws-2009_feder_fur_flexiputzer-_lo_ru-1.webp?v=20240429103959)
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
Main wheel axle castle nut, M12
This is the castle nut is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 8 mm, M12 x 1,5 DIN 937.
from 1 € 12.91 incl. 19% VAT
€ 10.85 -
Eta fuse for instuments
These fuses are used for instruments.
They are available in 2, 4 and 6,3 A.
from 1 € 13.09 incl. 19% VAT
€ 11.00from 1 € 20.40 incl. 19% VAT
€ 17.14from 1 € 8.91 incl. 19% VAT
€ 7.49 -
Foam sealing
from 1 € 13.09 incl. 19% VAT
€ 11.00 -
Tesa foam for horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
Description: Tesa foam 9 x 4 mm, 10 m by roll.
For a simple installation, you can instead buy premade form that can be easily adapted to single seater and double seater.
from 1 € 13.16 incl. 19% VAT
€ 11.06 -
Single seater horiz. tailplane sealing for Ventus-3 Sport
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus-2a, -2b and the Ventus-3 Sport. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 13.52 incl. 19% VAT
€ 11.36 -
Aileron drive cover for Duo Discus
from 1 € 13.80 incl. 19% VAT
€ 11.60 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 13.83 incl. 19% VAT
€ 11.62 -
Brake pull cable for single seaters with magura type disc
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST, with a “Magura” cylinder brake.
The brake cable measures 555 mm in length and features a 6 x 10 mm nipple.
from 1 € 13.96 incl. 19% VAT
€ 11.73 -
Ring buffer for SOLO 2350
SOLO Silent block bush, spare part n° 00 94 240
It is 14 mm large and its diameter is 37 mm.
from 1 € 14.93 incl. 19% VAT
€ 12.55 -
Main wheel axle castle nut, M14 for double seaters
This is the castle nut is used for the main landing gear of all the Duo Discus and Arcus.
It is 8 mm, M14 x 1,5 DIN 937.
from 1 € 15.16 incl. 19% VAT
€ 12.74 -
Double seater horiz. tailplane sealing
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 98,80 x 435,00 mm. It is designed for the Duo Discus and the Arcus horizontal tailplanes. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself from a Tesa Foam roll.
from 1 € 15.51 incl. 19% VAT
€ 13.03 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Rod end bearing KA-6-DC2, M8 x 50
Rod end bearing with a KA-6-DC2 head (askubal) and M8 x 50 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 16.04 incl. 19% VAT
€ 13.48
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.