Spare parts
-
Maintenance manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
To adapt this manual to your glider, you must assemble the revisions relevant to your specific glider. We are just sending you all revisions in a PDF version.
Please use the delivery option "Pick up at Schempp-Hirth" to avoid shipping fee if you only order the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Flight manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
In order to make this manual specific to your glider, you will need to put together the revisions that are relevant for your glider. We are just sending you all the revisions on a PDF version.
Please use the delivery option “Pick Up at Schempp-Hirth” to avaoid to pay for shippment if you are ordering only the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 88.33 incl. 19% VAT
€ 74.23 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.64 incl. 19% VAT
€ 39.19 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
Aileron drive cover for Duo Discus
from 1 € 13.80 incl. 19% VAT
€ 11.60 -
Flap handle for some Ventus-2c and the Ventus-3
from 1 € 8.45 incl. 19% VAT
€ 7.10 -
Spring for rudder pedal adjustment
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanism used to included a spring. It is now replace by a gummi band.
With the kit B40-3235, you can upgrade the old sytem to the newest one.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Black T-handle
from 1 € 3.34 incl. 19% VAT
€ 2.81 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Canopy locking mechanism for Duo Discus and Nimbus-4D
This kit is for the TN 380-1 and TN396-6.
According to your glider, you might need the optional guide or not.
Please read the TNs carefully.
from 1 € 126.14 incl. 19% VAT
€ 106.00from 1 € 201.93 incl. 19% VAT
€ 169.69 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
Distance washer for mainwheel
This washer is 14 x 2 x 32 mm and it is used for the main wheel of almost all Schempp-Hirth gliders.from 1 € 8.10 incl. 19% VAT
€ 6.81 -
Air filter for SOLO 2625-02i
This air filter RC-1060 (Solo ref: 25 00 845) is used for the 2625-02i.
It used to be rectangular but the shape changed. You can use this model instead of the square ones.
from 1 € 142.86 incl. 19% VAT
€ 120.05 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
V-belt for Ventus-3M SOLO 2625-01i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 225
from 1 € 328.94 incl. 19% VAT
€ 276.42 -
Perspex disc 53,5 mm with bracket
This plexi cover is made for the Janus, the Ventus b and some Ventus-2. It is used in the TN 349-42 / 825-57.
Its diameter is 53,5 mm and the central hole is 5 mm. The locking device is 100mm long.
from 1 € 108.15 incl. 19% VAT
€ 90.88 -
Hexagon screw 06032, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 3.96 incl. 19% VAT
€ 3.33 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 63.87 incl. 19% VAT
€ 53.67 -
Water filler cap for Arcus Edition 2020
This sealing lid is for the Arcus edition 2020.
It is equipped of a non-return valve.
from 1 € 106.60 incl. 19% VAT
€ 89.58 -
Water filler cap sealing for Ventus-3
This sealing is made for the Ventus-3 sealing caps.
Its diameter is 26 mm and the sealing is 4,0mm thick.
from 1 € 8.19 incl. 19% VAT
€ 6.88 -
Outer water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 outer wing.
The plug used for the inner wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 27.75 incl. 19% VAT
€ 23.32 -
Inner and middle water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 inner wing.
The plug used for the outer wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 22.24 incl. 19% VAT
€ 18.69 -
Cover for mounting slot of the outer wing, for Discus-2c and Ventus-3
This cover is 20 x 120 mm and it is made to cover the mounting slot of the outer wing panel of the Discus-2c and Ventus-3.
The model you need maybe different. For example, this item doesn't fit the Nimbus-4D. To order another cover type, please contact Schempp-Hirth Spare Part.
from 1 € 31.27 incl. 19% VAT
€ 26.28 -
Wingtip skid for all Duo Discus
This skid is 194 x 47 x 37 mm and is used for all Duo Discus.
Double face tape is already fixed on the skid to make it easy to instal.
from 1 € 86.81 incl. 19% VAT
€ 72.95 -
Wingtip skid for Discus-2
This skid is 164 x 48 x 36 mm is used for the Discus-2a, -2b and 2-c.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 34.00 incl. 19% VAT
€ 28.57 -
Wingtip skid for Discus, Ventus and Ventus-2
This skid is 121 x 35 x 28,5 mm and is used for Discus a, Discus b, Ventus b, Ventus c and all the Ventus-2.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 38.26 incl. 19% VAT
€ 32.15 -
Wingtip complet wheel, Lindner System, for Arcus
This wingtip wheel is designed for the Arcus. It is aerodynamic but high enough and resistant to drive on the ground.
The item is 236 x 116 x 69 mm and the screws are 165 mm apart.
It sold by the unit and the screws are provided.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip wheel, Lindner System, for Duo Discus and Discus-2c
The Lindner system offers a great compromise between aerodynamic and ease of handling on the ground.
This wingtip wheel is designed for the Duo Discus and the Discus-2c. To install these wheels, your glider need to have the adapted fixation system.
The support, with the wheel, is 211 X 60 x 100 mm and has two holes for screws, that are 165 mm apart.
It is sold by the unit and the screws are included.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip complet wheel, Lindner System, for Ventus-2c
This wingtip wheel is made for the Ventus-2c.
This system is aerodynamic and compact (212 x 95 x 59 mm). In addition it is weighting only 200 g.
It is sold by the unit.
You can to fix it with screws that are included. Look at look wing tip, the holes are 165 mm apart.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50 -
Wingtip wheel, Lindner System, for Duo Discus, Discus-2c, Ventus-2c and Ventus-3
This wingtip wheel is 84 x 84 x 11 mm rim with a 60 x 10 O-Ring NBR70 tyre. It made for the Lindner system wingtip wheels of the Duo Discus, Discus-2c and the Ventus.
It is sold by the unit.
from 1 € 88.94 incl. 19% VAT
€ 74.74 -
Wingtip wheel, Lindner System, for Arcus
This wingtip wheel is made for the Arcus. The diameter of the rim is 90 mm and it is associated with a Ø80 x Ø10 O-Ring.
It is sold by the unit.
from 1 € 80.80 incl. 19% VAT
€ 67.90 -
O-Ring for wing wheel Lindner of the Duo Discus, Discus and the Ventus, Ø60
This gummi ring is Ø60 x Ø10 and is the tire of the wing wheel Lindner of the Duo Discus, Discus and the Ventus.
It is sold by the unit.
from 1 € 2.89 incl. 19% VAT
€ 2.43 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Pneumatic tension springn connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 163.46 incl. 19% VAT
€ 137.36 -
Pneumatic tension spring for mini Nimbus airbrakes
This 150N gas strut is used for the Mini-Nimbus airbreaks.
from 1 € 182.71 incl. 19% VAT
€ 153.54 -
Cockpit symbol for Arcus
This label is made for the Arcus (Arcus M SN<216 and Arcus T SN<90).
from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 33.32 incl. 19% VAT
€ 28.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.