Spare parts
-
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
Please contact the spare part team for the other reference.
from 1 € 18.21 incl. 19% VAT
€ 15.30 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 2.38 incl. 19% VAT
€ 2.00 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 41.77 incl. 19% VAT
€ 35.10 -
Washer Ø12,1XØ17X1,5 for the tailwheel axle
This washer is used for some Schempp-Hirth tailwheel axle with the original 200x50 with or without led.
It is Ø12,1XØ17X1,5.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Pressure gauge extension for MH oxygen bottles
This adapter is necessary for the MH Oxygen bottle.
Indeed the neck of these bottle is short and wide and, without the extension, the pressure gauge prevents the neck holder from being installed.
from 1 € 43.21 incl. 19% VAT
€ 36.31 -
Maintenance manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
To adapt this manual to your glider, you must assemble the revisions relevant to your specific glider. We are just sending you all revisions in a PDF version.
Please use the delivery option "Pick up at Schempp-Hirth" to avoid shipping fee if you only order the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Flight manual in PDF
In order to complete your order and send you the correct flight manual, we will need the precise type and the serial number of your glider. You can enter it below.
In order to make this manual specific to your glider, you will need to put together the revisions that are relevant for your glider. We are just sending you all the revisions on a PDF version.
Please use the delivery option “Pick Up at Schempp-Hirth” to avaoid to pay for shippment if you are ordering only the PDF.
Our team will contat you within a few weeks with the PDF.
from 1 € 59.50 incl. 19% VAT
€ 50.00 -
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 88.33 incl. 19% VAT
€ 74.23 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.64 incl. 19% VAT
€ 39.19 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.