Spare parts
-
Fuel Tank for Ventus-2c(x)M for replacement
This item will allow you to replace the wing fuel tank of your Ventus-2cM and Ventus-2cxM.
from 1 € 1,482.48 incl. 19% VAT
€ 1,245.78 -
Landing gear spring strut for all almost single seaters
This item is part of the landing gear of all the modern Schempp-Hirth single seater, with a landing gear in metall.
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with glass fiber undercarriage need another strut. It looks different but if you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 282.53 incl. 19% VAT
€ 237.42 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00 -
Splint bolt for the Duo Discus and Nimbus-4D brake handles
This bold is 6h11x28 mm, DIN 1434 / ISO 22341 and galvanized.
It is at the level of the pilot stick both front and back in the Duo Discus and the Nimbus-4D. With time, it can get rusty.
It is sold here with its splint: 1,6 x 16, DIN 94 / ISO 1234 galvanized.
from 1 € 0.83 incl. 19% VAT
€ 0.70 -
Distance washer for tailwheel
This washer is 16 x 2 x 5,5 mm and it is used for the tail wheel.from 1 € 17.62 incl. 19% VAT
€ 14.81 -
![BWS-2009_Feder_für_Flexiputzer,_lo_ru[1].jpg](/uploads/tx_aimeos/1.d/preview/d/d/dd8babc5_bws-2009_feder_fur_flexiputzer-_lo_ru-1.webp?v=20240429103959)
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
![BWS-2004_Rueckholsei_Dyneema[1].jpg](/uploads/tx_aimeos/1.d/preview/5/0/50a70c5c_bws-2004_rueckholsei_dyneema-1.webp?v=20240429102416)
Retrieval line Dyneema BWS
This retrieval Line Dyneema is coated and talc-powdered.
The roll contain 25 m.
5 meter cleaning fialment are also provided !
from 1 € 30.94 incl. 19% VAT
€ 26.00 -
![BWS-1040_Umlenkrollenset[1].jpg](/uploads/tx_aimeos/1.d/preview/2/1/21947032_bws-1040_umlenkrollenset-1.webp?v=20240426143626)
BWS Pulley set
The deflection pulley is used to eliminate friction from the Bowden cables (in mosquito cleaner systems) in the event of major directional changes of the cable to enable lower manual force/power consumption and faster cleaning.from 1 € 90.44 incl. 19% VAT
€ 76.00 -
![BWS-1015_Montageschlitten_Typ_4[1].jpg](/uploads/tx_aimeos/1.d/preview/0/c/0c02a99e_bws-1015_montageschlitten_typ_4-1.webp?v=20240426140020)
BWS Mounting plate Nr. 4 for Flexiwiper Winch in double seaters
The mounting plate 4 is specifically designed for the winch to be installed near the back seat pilot feet on the left side.
Please look carefully at the picture.
If you prefer to install it on the right side, you will need the mounting plate Nr. 3.
from 1 € 32.13 incl. 19% VAT
€ 27.00
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.