Spare parts
-
Wingtip skid for Discus-2
This skid is 164 x 48 x 36 mm is used for the Discus-2a, -2b and 2-c.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 34.00 incl. 19% VAT
€ 28.57 -
Wingtip skid for Discus, Ventus and Ventus-2
This skid is 121 x 35 x 28,5 mm and is used for Discus a, Discus b, Ventus b, Ventus c and all the Ventus-2.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 38.26 incl. 19% VAT
€ 32.15 -
Wingtip complet wheel, Lindner System, for Arcus
This wingtip wheel is designed for the Arcus. It is aerodynamic but high enough and resistant to drive on the ground.
The item is 236 x 116 x 69 mm and the screws are 165 mm apart.
It sold by the unit and the screws are provided.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip wheel, Lindner System, for Duo Discus and Discus-2c
The Lindner system offers a great compromise between aerodynamic and ease of handling on the ground.
This wingtip wheel is designed for the Duo Discus and the Discus-2c. To install these wheels, your glider need to have the adapted fixation system.
The support, with the wheel, is 211 X 60 x 100 mm and has two holes for screws, that are 165 mm apart.
It is sold by the unit and the screws are included.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip complet wheel, Lindner System, for Ventus-2c
This wingtip wheel is made for the Ventus-2c.
This system is aerodynamic and compact (212 x 95 x 59 mm). In addition it is weighting only 200 g.
It is sold by the unit.
You can to fix it with screws that are included. Look at look wing tip, the holes are 165 mm apart.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50 -
Wingtip wheel, Lindner System, for Duo Discus, Discus-2c, Ventus-2c and Ventus-3
This wingtip wheel is 84 x 84 x 11 mm rim with a 60 x 10 O-Ring NBR70 tyre. It made for the Lindner system wingtip wheels of the Duo Discus, Discus-2c and the Ventus.
It is sold by the unit.
from 1 € 88.94 incl. 19% VAT
€ 74.74 -
Wingtip wheel, Lindner System, for Arcus
This wingtip wheel is made for the Arcus. The diameter of the rim is 90 mm and it is associated with a Ø80 x Ø10 O-Ring.
It is sold by the unit.
from 1 € 80.80 incl. 19% VAT
€ 67.90 -
O-Ring for wing wheel Lindner of the Duo Discus, Discus and the Ventus, Ø60
This gummi ring is Ø60 x Ø10 and is the tire of the wing wheel Lindner of the Duo Discus, Discus and the Ventus.
It is sold by the unit.
from 1 € 2.89 incl. 19% VAT
€ 2.43 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Pneumatic tension springn connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 163.46 incl. 19% VAT
€ 137.36 -
Pneumatic tension spring for mini Nimbus airbrakes
This 150N gas strut is used for the Mini-Nimbus airbreaks.
from 1 € 182.71 incl. 19% VAT
€ 153.54 -
Cockpit symbol for Arcus
This label is made for the Arcus (Arcus M SN<216 and Arcus T SN<90).
from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 33.32 incl. 19% VAT
€ 28.00from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Flap position symbol for the Arcus
This label is made for the original Arcus.
from 1 € 20.93 incl. 19% VAT
€ 17.59 -
Cockpit symbol for Discus-2c
This label is made for Discus-2cfrom 1 € 20.93 incl. 19% VAT
€ 17.59 -
Cockpit symbol for Ventus-3
This label is made for the Ventus-3.
from 1 € 28.24 incl. 19% VAT
€ 23.73 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.