Spare parts
-
DZUS-quick fastener pin
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Shim washer for 10 mm diameter wing bolt
These washers are 14x9,8x0,5 mm.
They are made for the wing bolt that have a 10 mm diameter. This includes the wing extension bolt of all Arcus, all Duo Discus, the Nimbus-3, -3D, -4 and -4D, the Janus, the Discus-b, the Discus-2a and -2b and the Ventus c. It is also the case for the winglet bolt of the Discus, the Standard Cirrus, the Ventus-2a and the Ventus-2b.
These washers internal diameter is 9,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
They are sold in a kit of 4.
from 1 € 5.05 incl. 19% VAT
€ 4.24 -
Gasket for canopy frame of the Double Seaters
This gasket is used for the canopy of the Duo Discus and the Arcus.
It is sold by the meter.
from 1 € 5.22 incl. 19% VAT
€ 4.39 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.25 incl. 19% VAT
€ 4.41 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw, washer and lock nut can be added as an option.
The EASA form one is included.
from 1 € 5.46 incl. 19% VAT
€ 4.59 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Yellow T-handle, for tow-hook actuation
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Bowden cable 5,3x4,4x3,0 mm
This bowden cable is 5,3 x 4,4 x 3,0 mm. It can also be referred to as 5.51.0000.022.
It is sold by the meter and includes 2 cable end caps.
This cable is often used for the wheel brake systems. Please refer to your maintenance manual for the type of cable you need and how to make the connections.
from 1 € 6.27 incl. 19% VAT
€ 5.27 -
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Landing gear guide plate
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Washer for spar bridge
This washer DIN 9021 M8, 8,4 bright countersunk is mainly use to fix the O2-bottle holder when the holder is over the spar bridge.
from 1 € 6.84 incl. 19% VAT
€ 5.75 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.04 incl. 19% VAT
€ 5.92 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
Tailwheel tube 200x50 with 90° valve
This tube is for all 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.