Spare parts
-
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
Magnet for Ventus-2c, Discus-c and Double seater canopy closing mecanism
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Knurled nut M10 for trim weight
This knurled nut M10 DIN 467 is used to secure the cockpit weights of all the Ventus-3, the Arcus and some Duo Discus (xL).
It is sold with the safety pin (L01-0142)
from 1 € 6.31 incl. 19% VAT
€ 5.30 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
O-ring Ø32 x Ø3 for water dump system of the Duo Discus xL, the Arcus, the Discus-2c and the Ventus-2cx
This O-ring Ø32 x Ø3 is used for the water dump valve of several gliders:
- the Duo Discus x and xL,
- all the Arcus,
- some Discus-2c (the system has been upgraded in 2005),
- the Ventus-2cx and the Ventus-2cxa for the inner wing dump system not the outer wing.
from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Fokker-safety pin for trim weights
This safety pin (or Fokker pin) is 1,5 mm and it is used to secure the cockpit weight in Schempp-Hirth gliders.from 1 € 1.34 incl. 19% VAT
€ 1.13 -
Wing nut for trim weights
This butterfly nut is M10 (DIN 315) and it is used to secure the cockpit weights in all Schempp-Hirth single seaters (except the Ventus-3), the Nimbus, the Janus and some of the first Duo Discus.from 1 € 5.83 incl. 19% VAT
€ 4.90 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.