Spare parts
-
Cockpit symbol for Discus-2c
This label is made for Discus-2cfrom 1 € 28.98 incl. 19% VAT
€ 24.35 -
Cockpit symbol for Ventus-3
This label is made for the Ventus-3.
from 1 € 28.24 incl. 19% VAT
€ 23.73 -
Cockpit symbol
These pictograms can be used in Discus-2 and Duo Discus.from 1 € 33.32 incl. 19% VAT
€ 28.00 -
Elektret gooseneck microphone
This microphone is adapted to radio with electret input.
Mounting kit is included in the price.
from 1 € 282.07 incl. 19% VAT
€ 237.03 -
Temperature gauge
The temperature-indicator TF-00-059 is compact and readable. It temperatur captor can easily reach the front ventilation with its 125 cm cable.
This thermometer is mandatory for all the Schempp-Hirth gliders with water ballast.
from 1 € 37.90 incl. 19% VAT
€ 31.85 -
Rear-view mirror
from 1 € 83.06 incl. 19% VAT
€ 69.80 -
Safety harness Schroth
The seat belts SCHROTH 4-point restraint features the proven and ergonomic SCHROTH rotary actuator. It is light and comfortable, ideal for long flights.
We are selling online only the blue and darkred SCHROTH harness. In addition, Schempp-Hirth gliders can also be equipped with safety harness from Gadringer. If you wish to buy on of these models, please contact the Schempp-Hirth Spare Part.
from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00from 1 € 589.05 incl. 19% VAT
€ 495.00 -
Cup washer for the seat pan
These cup washers are used for the bucket seat.
It is size M6 and its dimensions are 13 x 13 x 3 mm.
Tip: For a nicer finish, use these M6 washers with M5 screws (See suggested products).
from 1 € 0.26 incl. 19% VAT
€ 0.22 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 14.04 incl. 19% VAT
€ 11.80 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02 -
Rotule L'Hotellier MS 961-150-150-L3
This l'Hotellier ball end is used for gliders with manual control hookups.
For some gliders, including the Cirrus, you need a washer and a locknut. They are included in the package.
The EASA Form 1 is included when needed.
from 1 € 115.73 incl. 19% VAT
€ 97.25 -
Pneumatic tension spring connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 175.92 incl. 19% VAT
€ 147.83 -
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97 -
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
Pneumatic tension spring for mini Nimbus airbrakes
This 150N gas strut is used for the Mini-Nimbus airbreaks.
from 1 € 182.71 incl. 19% VAT
€ 153.54 -
Shim washer for 10 mm diameter wing bolt
These washers are 14x9,8x0,5 mm.
They are made for the wing bolt that have a 10 mm diameter. This includes the wing extension bolt of all Arcus, all Duo Discus, the Nimbus-3, -3D, -4 and -4D, the Janus, the Discus-b, the Discus-2a and -2b and the Ventus c. It is also the case for the winglet bolt of the Discus, the Standard Cirrus, the Ventus-2a and the Ventus-2b.
These washers internal diameter is 9,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
They are sold in a kit of 4.
from 1 € 6.14 incl. 19% VAT
€ 5.16 -
Lock nut M6 TRELOC, DIN 439 galvanized
from 1 € 0.38 incl. 19% VAT
€ 0.32 -
spherical bearing GL 18
This spherical bearing is adapted for 18mm diameter pin of the double seaters.
The internal diameter is 18 mm and the part is 32x32x14 mm.
from 1 € 17.06 incl. 19% VAT
€ 14.34 -
Spherical bearing GL 14
This spherical bearing is adapted for 14mm diameter pin of the single seaters.
The internal diameter is 14 mm and the part is 25x25x8-11 mm.
from 1 € 28.56 incl. 19% VAT
€ 24.00 -
Wing attachment bolt for Ventus-2c and Discus-2c, back
The visible part of the peg is 70,5 mm long with a 14 mm diameter. The internal part is 35 mm long, with a 40 mm diameter.
It is used on the back part of the Discus-2c and Ventus-2c wing roots.
from 1 € 93.58 incl. 19% VAT
€ 78.64
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.