Spare parts
-
Splint bolt for the Duo Discus and Nimbus-4D brake handles
This bold is 6h11x28 mm, DIN 1434 / ISO 22341 and galvanized.
It is at the level of the pilot stick both front and back in the Duo Discus and the Nimbus-4D. With time, it can get rusty.
It is sold here with its splint: 1,6 x 16, DIN 94 / ISO 1234 galvanized.
from 1 € 0.83 incl. 19% VAT
€ 0.70 -
Distance washer for tailwheel
This washer is 16 x 2 x 5,5 mm and it is used for the tail wheel.from 1 € 17.62 incl. 19% VAT
€ 14.81 -
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
Retrieval line Dyneema BWS
This retrieval Line Dyneema is coated and talc-powdered.
The roll contain 25 m.
5 meter cleaning fialment are also provided !
from 1 € 30.94 incl. 19% VAT
€ 26.00 -
BWS Pulley set
The deflection pulley is used to eliminate friction from the Bowden cables (in mosquito cleaner systems) in the event of major directional changes of the cable to enable lower manual force/power consumption and faster cleaning.from 1 € 90.44 incl. 19% VAT
€ 76.00 -
BWS Mounting plate Nr. 4 for Flexiwiper Winch in double seaters
The mounting plate 4 is specifically designed for the winch to be installed near the back seat pilot feet on the left side.
Please look carefully at the picture.
If you prefer to install it on the right side, you will need the mounting plate Nr. 3.
from 1 € 32.13 incl. 19% VAT
€ 27.00 -
BWS Flexiwiper by Laminar Aerotec
From wing root to wing tip: The patented joint system adapts to the profile of the glider type during the cleaning process.
At a glance:
- A bug wiper for all types of glider.
- Aerodynamic shape.
- Streamlined, therefore minimum resistance.
- Fiber reinforced plastics with high strength.
- No buckling and no twisting of the components.
- UV-resistant.
- Double guided cleaning fialments: cleans efficiently and glides stably.
- Rests against the profile above and below the wings during the cleaning process.
- Fast mounting.
The BWS Flexiwiper can be retrofitted to almost any glider. For all Schempp-Hirth gliders, the retrival line is routed below the wing. Only this option is available in this shop. Before ordering for another type of glider, you have to consider whether the retrieval line is routed above or below the wing.
The package includes:
- 1 left and 1 right bug wiper inclusive fialments.
- 2 x tilt bracket to fit the fuselage.
- Installation manual.
You can find spare parts and related item below.
from 1 € 354.62 incl. 19% VAT
€ 298.00 -
BWS Electric Winch for double seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optionnal, please contact us).
- It is sold here with the mounting type 1, the most versatil one. However, if you want to install the winch near the feet of the backseat pilot, you may want to look also to the mounting plate Nr. 3 and Nr. 4.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1
- 2 x Double switch for instrument panel mounting
- Installation kit double seater
- Installation and operating manuals
You can find spare parts, other mounting plates and related items below.
from 1 € 2,105.11 incl. 19% VAT
€ 1,769.00 -
BWS Electric Winch for all single seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optional, please contact us).
- It is sold here with the mounting type 1, the most versatil one, but a large variety of plates are available for easy and flexible installation.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1 - Suitable for almost all aircraft and installation positions. Special mounting slides (e.g. for Arcus) are also available.
- Double switch for instrument panel mounting
- Installation kit single seater
- Installation and operating manual
You can find spare parts, other mounting plates and related items below.
from 1 € 2,009.91 incl. 19% VAT
€ 1,689.00 -
BWS Crank handle by Laminar Aerotec
The simple and proven solution for your bug wriper.
With its integrated damping system, it offers a smooth-run.
It is delivered with:
- 2 pieces BWS crank handles
- Mounting plate
- Installation kit
- Installation and operating manuals
You can find spare parts and related item below.
from 1 € 581.91 incl. 19% VAT
€ 489.00 -
Fuel Tank for Arcus M for replacement
This item will allow you to replace the wing fuel tank of your Arcus.
from 1 € 1,482.48 incl. 19% VAT
€ 1,245.78 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Flat spring for Janus, Nimbus-2, -3D, -4D flap drive
This tension spring is used to maintain the flap handle on the right position.
On the Janus B and Nimbus-2, it is located near the front seat handle.
Originally, the Janus C, the Nimbus-3D and the Nimbus-4D are using another spring that looks very different (ref B40-2417) and that is located on the back seat cockpit wall. However some gliders have been modified and they are now using this flat spring but near the spar bridge.
Please contact the spare part team for the other reference.
from 1 € 18.21 incl. 19% VAT
€ 15.30 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 2.38 incl. 19% VAT
€ 2.00 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 41.77 incl. 19% VAT
€ 35.10 -
Washer Ø12,1XØ17X1,5 for the tailwheel axle
This washer is used for some Schempp-Hirth tailwheel axle with the original 200x50 with or without led.
It is Ø12,1XØ17X1,5.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Pressure gauge extension for MH oxygen bottles
This adapter is necessary for the MH Oxygen bottle.
Indeed the neck of these bottle is short and wide and, without the extension, the pressure gauge prevents the neck holder from being installed.
from 1 € 43.21 incl. 19% VAT
€ 36.31
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.