Wing
-
Roll pin for aileron
These roll pins are used to secure the aileron.
Dimension: 2 x 10 mm
DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Compression spring for airbrake (straight shape)
This spring is designed for the airbrakes of all Schempp-Hirth gliders.
The spring is 0.8 mm x 7.8 mm x 30 mm.
Depending on your glider model, each airbrake may require between 9 and 11 of these springs.
Important Note: The exterior springs often differ from this ones. You can find the suitable exterior springs (ref L03-0032) among our suggested products.
from 1 € 0.51 incl. 19% VAT
€ 0.43 -
Safety ring-spring steel, DIN471, size 8
This safety ring-spring steel, DIN471, size 8 is used to secure the Lindner wingtip wheel axle.from 1 € 0.55 incl. 19% VAT
€ 0.46 -
O-ring Ø32 x Ø3 for water dump system of the Duo Discus xL, the Arcus, the Discus-2c and the Ventus-2cx
This O-ring Ø32 x Ø3 is used for the water dump valve of several gliders:
- the Duo Discus x and xL,
- all the Arcus,
- some Discus-2c (the system has been upgraded in 2005),
- the Ventus-2cx and the Ventus-2cxa for the inner wing dump system not the outer wing.
from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Compression spring for airbrake (conical)
This spring is designed for the airbrakes of all Schempp-Hirth gliders ecxcept the Ventus-3.
The spring is 1 x 10 x 30 mm.
Depending on your glider model, each airbrake may require 2 of these springs.
Important Note: This spring is used on the outside of the airbrakes. The other spring are straight (ref L03-0033). You can find them among our suggested products.
from 1 € 0.73 incl. 19% VAT
€ 0.61 -
Shim washer 0,3 mm for 18 mm wing bolt
This washer is used to adjust the distance between the wing and the fuselage. It is 0.3 mm thick.
They fit an 18 mm wing bolt, including both the front and rear bolts at the wing root of two-seater aircraft.
The washers have an internal diameter of 17.8 mm. They are slightly smaller than the bolt to ensure they stay in place when installed.
A kit containing eight washers with a thickness of 0.5 mm and four washers with a thickness of 0.8 mm is also available.
from 1 € 1.32 incl. 19% VAT
€ 1.11 -
O-Ring for wing wheel Lindner of the Duo Discus, Discus and the Ventus, Ø60
This gummi ring is Ø60 x Ø10 and is the tire of the wing wheel Lindner of the Duo Discus, Discus and the Ventus.
It is sold by the unit.
from 1 € 2.89 incl. 19% VAT
€ 2.43 -
Perspex disc 78,3 mm with 5 mm hole
This perspex disc is made for Arcus, all Duo Discus, Ventus-3, Discus-2b, -2c, Discus b and cs.
However, some gliders have more than one perspex disc and they can be different. Please look at the diameter and model you need.
Its diameter is 78,3 mm and the central hole is 5 mm.
from 1 € 3.65 incl. 19% VAT
€ 3.07 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.