Spare parts
-
Bracket for battery box
This fiberglass bracket is designed for 7.5 Ah battery holders.
It has a width of 38 mm and fits a 97 mm battery. The shape is straight.
A similar model (F60-0651) features a bend and is used in several gliders, including the Duo Discus XL and the Arcus. Please check the model installed in your glider carefully before purchasing.
from 1 € 33.80 incl. 19% VAT
€ 28.40 -
Brake pad for Tost BZT2 (Post-2017 Models)
These brake linings (Tost P/N 080949) are designed for the BZT2 brake assembly installed after 2017 with a thread M10x1. It is not compatible with the model with a thread NPT See drawing.
The BZT2 system is compatible with 5″ and 6″ disc brake wheels from the Penta and Classic series. It is commonly installed on the Ventus-3 and Arcus edition 2020 models.
Please note that different braking systems have been used over time, and several Technical Notices (TN) have been approved. Carefully inspect your brakes before ordering to ensure you select the correct brake pad.
from 1 € 96.98 incl. 19% VAT
€ 81.50 -
Felt ring for 14 c6 bearing
Thesef felt rings measure 20x10 mm and are 3 mm thick. They are designed for 14 C6 bearings.
Please note that a thinner model (L07-0594) is used for 10 C6 bearings.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Throttle valve sensor for Solo 2625 01i and 02i
This throttle valve sensor mounted (Solo part number 23 00 910) is used in the Solo 2625 01i, Solo 2625 01i Neo and 2625 02i.
from 1 € 567.83 incl. 19% VAT
€ 477.17 -
Coolant hoses set for SOLO 2625 02
This hose set is designed for use with the Solo 2625 02 and 02i engines in the Arcus M and Arcus M edition 2020 gliders.from 1 € 201.01 incl. 19% VAT
€ 168.92 -
V-belt for Nimbus-4M and Nimbus-4DM
This 2520 Poly Chain GT2 toothed belt is designed for the pylon of the Nimbus-4M and Nimbus-4DM equipped with a Solo engine 2625.from 1 € 566.96 incl. 19% VAT
€ 476.44 -
Shrink hose CGPT-12.7/6.4-0
This high-quality, flexible shrink tubing is used for insulation and protection of cables and connections – including many fuel lines and some electronic components.
Minimum diameter before shrinking: 12.7 mm
Diameter after shrinking: 6.4 mm
It is sold by the meter.
from 1 € 2.77 incl. 19% VAT
€ 2.33 -
Lower rudder support fin, Arcus M
This support is used for the lower rudder of the Arcus M.
The EASA Form one is included.
from 1 € 1,272.37 incl. 19% VAT
€ 1,069.22 -
propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
from 1 € 518.49 incl. 19% VAT
€ 435.71 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Steerable tailwheel TOST Mini 150x30
This tailwheel Max "X/S" is designed for the Ventus-2cM and it is available as an option for the Ventus-3 Sport. It is 150x30 mm and filled with foam.
This model it isn't adapted to the Ventus_2cM carbon fork so if the wheel currently in place is less than 150 mm, please contact Schempp-Hirth spare-part service.
from 1 € 349.15 incl. 19% VAT
€ 293.40 -
Steerable tailwheel "Max II" 200x50
This wheel is made by Tost for the tail of the Arcus M, Ventus-3M and the Quintus M.
It is made in two parts, and it is adapted for a 12 mm axle and 200 x 50 tyres and tubes. In aluminium, silver anodized, it weights less than a kilo.
from 1 € 299.05 incl. 19% VAT
€ 251.30 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50 -
Wingtip wheel, Lindner System, for Duo Discus, Discus-2c, Ventus-2c and Ventus-3
This wingtip wheel is 84 x 84 x 11 mm rim with a 60 x 10 O-Ring NBR70 tyre. It made for the Lindner system wingtip wheels of the Duo Discus, Discus-2c and the Ventus.
It is sold by the unit.
from 1 € 88.94 incl. 19% VAT
€ 74.74 -
Wingtip wheel, Lindner System, for Arcus
This wingtip wheel is made for the Arcus. The diameter of the rim is 90 mm and it is associated with a Ø80 x Ø10 O-Ring.
It is sold by the unit.
from 1 € 80.80 incl. 19% VAT
€ 67.90 -
O-Ring for wing wheel Lindner of the Duo Discus, Discus and the Ventus, Ø60
This gummi ring is Ø60 x Ø10 and is the tire of the wing wheel Lindner of the Duo Discus, Discus and the Ventus.
It is sold by the unit.
from 1 € 2.89 incl. 19% VAT
€ 2.43 -
Tailwheel tyre 200x50
This 6PR tire from TOST AERO is used for all the 200x50 mm tailwheels and it is adapted to a large majority of modern Schempp-Hirth gliders.
from 1 € 34.15 incl. 19% VAT
€ 28.70
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.