Tail
-
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
The "heavy" Schempp-Hirth tailwheel
200x50 with lead
This is the Schempp-Hirth tailwheel, with lead.
This wheel is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance. Thanks to removable lead, it can weigh 2,6 or 3,6 kg.
Another model, without lead, black and weighting 0,930 kg is available. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 683.62 incl. 19% VAT
€ 574.47 -
Horizontal tailplane fitting, rear part
This item is part of the horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders.
Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
To change this part you may also need screws and washers that can be added as an option.
from 1 € 428.52 incl. 19% VAT
€ 360.10 -
Steerable tailwheel TOST Mini 150x30
This tailwheel Max "X/S" is designed for the Ventus-2cM and it is available as an option for the Ventus-3 Sport. It is 150x30 mm and filled with foam.
This model it isn't adapted to the Ventus_2cM carbon fork so if the wheel currently in place is less than 150 mm, please contact Schempp-Hirth spare-part service.
from 1 € 349.15 incl. 19% VAT
€ 293.40 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Steerable tailwheel "Max II" 200x50
This wheel is made by Tost for the tail of the Arcus M, Ventus-3M and the Quintus M.
It is made in two parts, and it is adapted for a 12 mm axle and 200 x 50 tyres and tubes. In aluminium, silver anodized, it weights less than a kilo.
from 1 € 299.05 incl. 19% VAT
€ 251.30 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Rubber skid for all gliders
This rubber skid is 330 x 70mm and it is adapted to all Schempp-Hirth gliders including Cirrus and Nimbus.
from 1 € 248.04 incl. 19% VAT
€ 208.44 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.