Wing
-
Winglets Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Winglets Arcus “20”. We offer this pair in raw conditions, ready to be laminated for installation on your wingtip.This work requires professional installation and paint finish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern : service(at)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and the SN number of your Arcus. You can enter it below.
from 1 € 4,641.00 incl. 19% VAT
€ 3,900.00 -
BWS Electric Winch for double seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optionnal, please contact us).
- It is sold here with the mounting type 1, the most versatil one. However, if you want to install the winch near the feet of the backseat pilot, you may want to look also to the mounting plate Nr. 3 and Nr. 4.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1
- 2 x Double switch for instrument panel mounting
- Installation kit double seater
- Installation and operating manuals
You can find spare parts, other mounting plates and related items below.
from 1 € 2,105.11 incl. 19% VAT
€ 1,769.00 -
BWS Electric Winch for all single seaters by Laminar Aerotec
This system is fast, reliable and easy to install in your glider.
The main features are:
- Short cleaning time of approx. 15 seconds per wing (even at high speeds).
- Simultaneous cleaning with both bug wipers possible.
- Three safety features: rope tension sensor, slip clutch and automatic shutdown on overload.
- Tear-resistant Dyneema line (retrieval line).
- Span adjustment (optional, please contact us).
- It is sold here with the mounting type 1, the most versatil one, but a large variety of plates are available for easy and flexible installation.
It is delivered with:
- 2 x BWS electric winches in the box
- 2 x mounting plate no. 1 - Suitable for almost all aircraft and installation positions. Special mounting slides (e.g. for Arcus) are also available.
- Double switch for instrument panel mounting
- Installation kit single seater
- Installation and operating manual
You can find spare parts, other mounting plates and related items below.
from 1 € 2,009.91 incl. 19% VAT
€ 1,689.00 -
bug-wiper for Ventus-3 and Arcus “20”
These bug-wipers blades are adapted for all the Ventus-3 variants and the Arcus Edition 2020 with garage for bug-wipers.from 1 € 609.14 incl. 19% VAT
€ 511.88 -
BWS Crank handle by Laminar Aerotec
The simple and proven solution for your bug wriper.
With its integrated damping system, it offers a smooth-run.
It is delivered with:
- 2 pieces BWS crank handles
- Mounting plate
- Installation kit
- Installation and operating manuals
You can find spare parts and related item below.
from 1 € 581.91 incl. 19% VAT
€ 489.00 -
Wingtip complet wheel, Lindner System, for Arcus
This wingtip wheel is designed for the Arcus. It is aerodynamic but high enough and resistant to drive on the ground.
The item is 236 x 116 x 69 mm and the screws are 165 mm apart.
It sold by the unit and the screws are provided.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip wheel, Lindner System, for Duo Discus and Discus-2c
The Lindner system offers a great compromise between aerodynamic and ease of handling on the ground.
This wingtip wheel is designed for the Duo Discus and the Discus-2c. To install these wheels, your glider need to have the adapted fixation system.
The support, with the wheel, is 211 X 60 x 100 mm and has two holes for screws, that are 165 mm apart.
It is sold by the unit and the screws are included.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Wingtip complet wheel, Lindner System, for Ventus-2c
This wingtip wheel is made for the Ventus-2c.
This system is aerodynamic and compact (212 x 95 x 59 mm). In addition it is weighting only 200 g.
It is sold by the unit.
You can to fix it with screws that are included. Look at look wing tip, the holes are 165 mm apart.
from 1 € 446.25 incl. 19% VAT
€ 375.00 -
Automatic control connection for single seaters (exc. Ventus-3)
This bell crank is used on Discus b, Discus c, Discus-2a, -2b, -2c, Ventus b, Ventus c and Ventus-2a, -2b, -2c.
You may need to change them according to the TN 349-43.
You can buy the screws and bolts needed to change the part as an option. This option is currently un available but will be back within a few weeks.
from 1 € 373.60 incl. 19% VAT
€ 313.95
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.