Wing
-
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
Aileron drive cover for Duo Discus
from 1 € 13.80 incl. 19% VAT
€ 11.60 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 13.83 incl. 19% VAT
€ 11.62 -
Perspex disc 53,5 mm with 5 mm hole
This perspex disc is made for the Ventus-2a.
Its diameter is 53,5 mm and the central hole is 5 mm.
from 1 € 16.79 incl. 19% VAT
€ 14.11 -
spherical bearing GL 18
This spherical bearing is adapted for 18mm diameter pin of the double seaters.
The internal diameter is 18 mm and the part is 32x32x14 mm.
from 1 € 17.06 incl. 19% VAT
€ 14.34 -
Shim washer kit for 14 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 14 mm wing bolt. That includes the front and back bolts at the wing root of almost all the single seaters as well as the wing extention bolt of the Discus-2c, Ventus-2c and Ventus-3 and some winglet bolts.
These washers internal diameter is 13,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 18.61 incl. 19% VAT
€ 15.64 -
Bellow V6-0052 for waterballasts
This flexible rubber boot is 63 x 39x 39 mm with a 10 mm and a 25 mm opening.
It is surrounding the ballast rod on the wing root of the Discus b, Ventus-2 (SN < 561), Discus-2a and Discus-2b (SN< 234) which have been produced before June 2009. However, some of these gliders might have been retrofitted with the newer system. You can see on the suggested product the other bellow.
It is used for the ballast system of the Nimbus-3, -3D, -4 and -4D. For the Nimbus, the bellow may need to be adapted by cutting the larger end.
It is also used as a sealing around the brake line when crossing the wheel box in all single seaters.
from 1 € 21.25 incl. 19% VAT
€ 17.86 -
Bellow V6-269 for water ballast control rod
This rubber boot is surrounding the water ballast control rod to avoid the water leaking through. It is used in several Schempp-Hirth gliders including the Nimbus-2, Ventus, Ventus-2c, Discus-2c, Duo Discus and the Arcus.
It is 125 x 22 x 22 mm with a 7 mm and a 16 mm opening.
Over the years, other bellows and different combinations have been used. You can find them underneath this description, in the "suggested products", if you want to compare them with the model that you wish to replace.
from 1 € 21.74 incl. 19% VAT
€ 18.27
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.