Engine
-
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
V-belt for Ventus-3M SOLO 2625-01i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 225
from 1 € 328.94 incl. 19% VAT
€ 276.42 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 63.87 incl. 19% VAT
€ 53.67 -
Limit switch IX02 0815
This proximity switch (ref IX02 0815) is used for the automatic propeller brake in the Arcus M.
It is not addapted to the Arcus M edition 2020.
This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.
from 1 € 140.04 incl. 19% VAT
€ 117.68 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 121.42 incl. 19% VAT
€ 102.03 -
Tooth belt for Ventus-2cM
This toothed belt is 2400 mm and is adapted for the Ventus-2cM pylon with a Solo 2625-01 engine.from 1 € 691.66 incl. 19% VAT
€ 581.23 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 209.39 incl. 19% VAT
€ 175.96 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN after 338)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is before SN 339, please use the kit for engine Solo 2350 (SN<339).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 209.39 incl. 19% VAT
€ 175.96 -
Water pump for SOLO 2625
This water pompe is used for all the SOLO engines 2625.from 1 € 652.24 incl. 19% VAT
€ 548.10 -
Ignition coil for Solo 2625 from Ducati
This ignition box from Ducati is used in the Solo 2625-01 and 2625-02 but not for the "i" version. The Solo 2625-01i and 2625-02i need the ignition coil from PVL.
The cable is included.
from 1 € 583.10 incl. 19% VAT
€ 490.00 -
Ignition coil for Solo 2625 type "i" from PVL
The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.from 1 € 192.22 incl. 19% VAT
€ 161.53 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 23.53 incl. 19% VAT
€ 19.77 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.