Engine
-
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T
Two models exist, with or without a base, please choose the model who is already on your glider.
They are 10 mm high.
They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 14.03 incl. 19% VAT
€ 11.79 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
Rain protection cap for spark plug
This piece is used to protect the spark plug from the rain in the SOLO 2350 engine.
SOLO spare part n° 00 84 203
from 1 € 4.01 incl. 19% VAT
€ 3.37 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.25 incl. 19% VAT
€ 4.41 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.04 incl. 19% VAT
€ 5.92 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 7.33 incl. 19% VAT
€ 6.16 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 7.83 incl. 19% VAT
€ 6.58 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Ring buffer for SOLO 2350
SOLO Silent block bush, spare part n° 00 94 240
It is 14 mm large and its diameter is 37 mm.
from 1 € 14.93 incl. 19% VAT
€ 12.55 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 20.72 incl. 19% VAT
€ 17.41 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 23.53 incl. 19% VAT
€ 19.77 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Cooler cap, 1,4 bar, for Solo 2625 type "i" from PVL
This lid is used for the cooler of all the Ventus-3M (Solo 2625-01i and 2625-01i neo) and all the Arcus M (Solo 2625-02i) but not for the other version.from 1 € 37.56 incl. 19% VAT
€ 31.56 -
Decompression retraction sheet, for SOLO 2350
This part is 148 x 20 x 20 mm.
It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000. The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 39.03 incl. 19% VAT
€ 32.80 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Pneumatic spring 600 N for engine mount for Ventus-2T, -3T and Discus-2(c)T
This pneumatic spring is 718 mm long. It is used for the Discus-2T, Discus-2cT, Ventus-2cT, Ventus-2cxT, Ventus-3TP and Ventus-3TS.
Older gliders are using a 500N strut. Its reference is L03-0063 and you can find it on the suggested products bellow.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 41.77 incl. 19% VAT
€ 35.10 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.64 incl. 19% VAT
€ 39.19 -
Spark plug connector 5k Ohm
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part used to be black. The old model is no longer available and it is replaced by this new reference.
from 1 € 52.59 incl. 19% VAT
€ 44.19 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 63.87 incl. 19% VAT
€ 53.67 -
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 66.70 incl. 19% VAT
€ 56.05 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 88.33 incl. 19% VAT
€ 74.23 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 121.42 incl. 19% VAT
€ 102.03 -
Limit switch IX02 0815
This proximity switch (ref IX02 0815) is used for the automatic propeller brake in the Arcus M.
It is not addapted to the Arcus M edition 2020.
This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.
from 1 € 140.04 incl. 19% VAT
€ 117.68 -
Air filter for SOLO 2625-02i
This air filter RC-1060 (Solo ref: 25 00 845) is used for the 2625-02i.
It used to be rectangular but the shape changed. You can use this model instead of the square ones.
from 1 € 142.86 incl. 19% VAT
€ 120.05 -
Coolant temperature sensor for Solo 2625 01 and 02
This sensor is used in the Solo 2625 01 and 2625 02 to measure the water temperature.
The sensor used on the Arcus M and Ventus-3M (Solo 2625 01i and 02i) is different. You can find it on the suggested products.
from 1 € 147.80 incl. 19% VAT
€ 124.20 -
Rubber element of the spindle suspension for almost all M
This part is used for the Discus bM, the Ventus-2cM, the Ventus-3M, the Nimbus-4DM and the Arcus M.from 1 € 177.57 incl. 19% VAT
€ 149.22 -
Ignition coil for Solo 2625 type "i" from PVL
The ignition box from PVL is used for the Solo 2625-01i and 2625-02i but not for the other version. The Solo 2625-01 and 2625-02 need the ignition coil from Ducati.from 1 € 192.22 incl. 19% VAT
€ 161.53 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 208.23 incl. 19% VAT
€ 174.98 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 209.39 incl. 19% VAT
€ 175.96 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN after 338)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is before SN 339, please use the kit for engine Solo 2350 (SN<339).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 209.39 incl. 19% VAT
€ 175.96 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
V-belt for Arcus M SOLO 2625-02i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 224
from 1 € 273.51 incl. 19% VAT
€ 229.84 -
RPM sensor, with pins, for Arcus M
This RPM sensor with cables and pins is used for the Solo 2625-02i.
from 1 € 300.76 incl. 19% VAT
€ 252.74
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.