Engine
-
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 20.72 incl. 19% VAT
€ 17.41 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 23.53 incl. 19% VAT
€ 19.77 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Decompression retraction sheet, for SOLO 2350
This part is 148 x 20 x 20 mm.
It is used for all Duo Discus T and Arcus T. It is also used in association with the turbo pylon of the single seater designed in 2000. The Discus-2T (SN>40), the Discus-2cT (SN>35) and the Ventus-2cT (SN>184) have been produced with the new pylon and this decompression retraction sheet while older models might have been modified. The latest Nimbus-4DT are also usin this part. The older retraction sheet looks different, so look carefully at the picture. You can find the older model here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 39.03 incl. 19% VAT
€ 32.80 -
pneumatic spring 500N for engine mount.
This gas strut is 500N and it is used for the engine mount of the Ventus T, Discus T, Ventus cM, the Nimbus-3T and the Nimbus-4T.
More modern single seaters are using the reference L03-0122, that is 600N. You can find it on the suggested product.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Pneumatic spring 600 N for engine mount for Ventus-2T, -3T and Discus-2(c)T
This pneumatic spring is 718 mm long. It is used for the Discus-2T, Discus-2cT, Ventus-2cT, Ventus-2cxT, Ventus-3TP and Ventus-3TS.
Older gliders are using a 500N strut. Its reference is L03-0063 and you can find it on the suggested products bellow.
from 1 € 41.63 incl. 19% VAT
€ 34.98 -
Fuel filters for Arcus M
These filters (1 filter Pierburg 4.00030.80.0 and 1 filter KL14 Mahle) are used for the fuel system of the Arcus M.from 1 € 41.77 incl. 19% VAT
€ 35.10 -
Spindle suspension with bushing
This rubber element is part of the spindelsuspension of the Ventus-2cM, Ventus-3M, Nimbus-4M, -4DM and Arcus M.
It is 34 mm long.
Depending on the equipment available to you, it might be easier to buy the complete part (B40-13772). See suggested products.
from 1 € 42.84 incl. 19% VAT
€ 36.00 -
Pneumatic spring 1000 N for engine mount for all Arcus T and Duo Discus T
This pneumatic spring is 820 mm long. It is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 46.64 incl. 19% VAT
€ 39.19 -
Spark plug connector 5k Ohm
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part used to be black. The old model is no longer available and it is replaced by this new reference.
from 1 € 52.59 incl. 19% VAT
€ 44.19 -
Air filter for SOLO 2625-01 and 2625-02
This air filter RU 2690 (Solo ref: 25 00 580) is used for the Solo 2625-01 and 2625-02.
from 1 € 59.67 incl. 19% VAT
€ 50.14 -
Ignition wire for Arcus M
This ignition cable is 35 cm long and it is used for the Arcus M.
You will need 4 units. if you want to change all of them.
from 1 € 63.87 incl. 19% VAT
€ 53.67 -
Kit pylon arresting wire for Ventus- 2cM, Ventus-3M, Arcus M, Nimbus-4M and -4DM
The kit contains the cable (diameter 3,2 mm), 2 nicopress-oval sleeves, 2 thimbles and some silicone tube. One side is already assembled.
It can be use for the Ventus-2cM, Ventus-3M, the Nimbus-4M and -4DM and the Arcus M.
Please refer to the maintenance manual for the installation.
from 1 € 66.70 incl. 19% VAT
€ 56.05 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Rubber element for the almost all modern engine mounts
This rubber element is use for the engine mount of the Arcus M, the Ventus-3M, Ventus-2cM, the Ventus-2cxM, the Nimbus-4M and the Nimbus-4DM.
Its old reference is VW 431407181D.
from 1 € 88.33 incl. 19% VAT
€ 74.23 -
Fuel filters for Ventus-3M
These filters (reference 6064-0A / 0 450 905 401 and E230204) are used for the fuel system of the Ventus-3M.from 1 € 121.42 incl. 19% VAT
€ 102.03 -
Limit switch IX02 0815
This proximity switch (ref IX02 0815) is used for the automatic propeller brake in the Arcus M.
It is not addapted to the Arcus M edition 2020.
This position sensor is sold as a unit (you might need two of them) and the FUT plug is included.
from 1 € 140.04 incl. 19% VAT
€ 117.68 -
Air filter for SOLO 2625-02i
This air filter RC-1060 (Solo ref: 25 00 845) is used for the 2625-02i.
It used to be rectangular but the shape changed. You can use this model instead of the square ones.
from 1 € 142.86 incl. 19% VAT
€ 120.05 -
Coolant temperature sensor for Solo 2625 01 and 02
This sensor is used in the Solo 2625 01 and 2625 02 to measure the water temperature.
The sensor used on the Arcus M and Ventus-3M (Solo 2625 01i and 02i) is different. You can find it on the suggested products.
from 1 € 147.80 incl. 19% VAT
€ 124.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.