Controls
-
Flap latch-in element for Ventus-2c, -2cx and -2bx
This part is used for the notching of the flaps of the Ventus-2bx, Ventus-2c and Ventus-2cx.
It is 146 mm long and the screw holes are spaced 50 and 69 mm apart respectively.
from 1 € 89.75 incl. 19% VAT
€ 75.42 -
Landing gear guide plate
This plate in grey PVC is used as a guide for all single-seater landing gear (except for the Ventus-3).
Its length is 220 x 24 mm and there is no hole. Adjust it to your glider.
from 1 € 6.47 incl. 19% VAT
€ 5.44 -
Kit for rudder pedal adjustment
This kit contains all you need to replace the pedal adjustment mechanism, including the instructions.
It is made for the Ventus b, Ventus c, Ventus-2, Discus, Discus-2, Nimbus-4, Duo Discus and the Arcus.
On the Nimbus-4, the Ventus, the Discus and the Duo Discus the mecanisme included a spring. It is now replace by a gummi band. With this kit, you can upgrade the old sytem to the newest one.
from 1 € 51.46 incl. 19% VAT
€ 43.24 -
Pilot stick handle, 19,3 mm
This pilot stick handle is made by Air Ergo Leki for the Schempp-Hirth 19,3 mm diameter control sticks.
3 adaptors are provided for the folowing settings: No SC, SC switch or SC button.
from 1 € 52.23 incl. 19% VAT
€ 43.89 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Springs for wingtip aileron of the Duo Discus XL
This pair of springs is used for the outer wing panel aileron of the DuoDiscus XL. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 2 mm and it makes more than 2,5 coiled.
The springs used for the Duo Discus and the Ventus-2 is only 1,5 mm. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 39.29 incl. 19% VAT
€ 33.02 -
Rotule L'Hotellier MS 961-150-150-L3
This l'Hotellier ball end is used for gliders with manual control hookups.
For some gliders, including the Cirrus, you need a washer and a locknut. They are included in the package.
The EASA Form 1 is included when needed.
from 1 € 66.12 incl. 19% VAT
€ 55.56 -
Pneumatic tension springn connecting the flap to the airbrake
This 200N gas strut is in the airbrake box. It connects the airbrake rod to the actuating lever of the trailing edge flap for the Duo Discus X and xL as well as the Nimbus-3D, -4 and -4D.
An older version used a gas spring from the company Hahn, you can use this one instead.
from 1 € 163.46 incl. 19% VAT
€ 137.36 -
Water filler cap
This sealing cap is for the Ventus-2, Discus-2, Duo Discus and the first Arcus.
The cap diameter is 36 mm and it is 5 mm high with a M6 hole on the side (B40-1226). Older gliders can have the same cap but the system may be different.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 52.32 incl. 19% VAT
€ 43.97
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.