Engine
-
Spark plug connector 5k Ohm - V2
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part was originally black, then changed to red, and has now been superseded by this new reference.
from 1 € 28.44 incl. 19% VAT
€ 23.90 -
Bracket with brake pad for propeller brake lever for Ventus-2cM, -3M, and Arcus M
This propeller brake pad is designed for the propellers of the almost all the Ventus-2cM, Ventus-3M, and all Arcus M models.
Some Nimbus-4M and Nimbus-4DM gliders may also be equipped with this system if Technical Note 868-19 has been applied.
from 1 € 27.36 incl. 19% VAT
€ 22.99 -
Screw for the rear spindle suspension of almost all the M
This screw is M10 x 58.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 26.18 incl. 19% VAT
€ 22.00 -
Exhaust gasket for Solo 2625
Gasket exhaust is used for the SOLO engines 2625.
It is 68,5 x 48 x 2 mm.
It is sold by the unit.
from 1 € 25.87 incl. 19% VAT
€ 21.74 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Fuel hose
This hose NW 4,8x1,6 mm is transparent and it is use for the Fuel sytem.
It is sold my the meter.
from 1 € 19.63 incl. 19% VAT
€ 16.50 -
Decompression retraction sheet, for SOLO 2350 old version
This part is 148 x 20 x 2 mm.
It is used for the old Nimbus-4T and single seater designed before 2000: The Discus-2T (SN<41), the Discus-2cT (SN<36) and the Ventus-2cT (SN<185).
Some of these gliders might have been modified. The new retraction sheet looks different, so look carefully at the picture to order the same that you have on your glider.
You can find the newer one here.
It is sold with its brass bushings, 8x1x2,5 mm.
from 1 € 15.98 incl. 19% VAT
€ 13.43 -
Ring buffer for SOLO 2350
SOLO Silent block bush, spare part n° 00 94 240
It is 14 mm large and its diameter is 37 mm.
from 1 € 14.93 incl. 19% VAT
€ 12.55 -
Copper mesh wire tube
This braided hose is KAG 3,11 QMM VSN 36 x 11 x 0,10.
It is used with the transparent hose NW 4,8x1,6 (T20-0064485) for the fuel sytem of almost all Turbo, the Ventus-2cM and the Nimbus-4DM.
It is sold by the meter.
Be aware that for Turbo gliders another mesh wire tube KAG 1,32 QMM 24x7x0,1 (ref: L07-0319) is used at the level of the T-connection.
from 1 € 10.25 incl. 19% VAT
€ 8.61 -
Rubber buffer 20x25, M6x18 for the radiator of the Ventus-2cM and Nimbus-4DM.
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM and Arcus M engine.
The head is 25 mm and the screw 18 mm. Its diameter is 20 mm.
Look at the model(s) that you want to replace and order the same. According to your glider, you might also want this rubber buffer.
from 1 € 9.21 incl. 19% VAT
€ 7.74 -
Cooling water gasket for the cylinder head of SOLO 2625
This sealing is used for the cooling system on the cylinder head of all SOLO 2625 engines.
It is 51 x 32 x 1,5 mm.
Older 2625 engines need another type of filter. If the filter you want to replace doesn't look like that one and is not in metal, contact Schempp-Hirth spare-part service.
from 1 € 8.37 incl. 19% VAT
€ 7.03 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 8.06 incl. 19% VAT
€ 6.77 -
Bush for the rear spindle suspension of almost all the M
This bushing is Ø13x1,5x34,5.
It is used for the rear spindle suspension of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 7.82 incl. 19% VAT
€ 6.57 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Gasket exhaust 1,5mm, for SOLO 2350
SOLO Silent block bush, spare part n° 20 61 395
from 1 € 7.75 incl. 19% VAT
€ 6.51 -
Kit for the FES improved shunt screw connection (TN)
This kit contains:- 2 screws 3/8"- Length: 5/8"
- 2 lock washers
It is used to fulfil the TN 627-8, TN 863-26 and TN 825-59. Please read the TN carefully.from 1 € 7.14 incl. 19% VAT
€ 6.00 -
Clevis G4x16 DIN 71752
Stainless steel fork head (clevis) with a 4 mm pin diameter and a 16 mm fork width, manufactured in accordance with DIN 71752.
It is used in the fuel actuation system of the Duo Discus T, Duo Discus xT, Duo Discus xLT, Arcus T, Arcus 20 T, Arcus 20 M, and Ventus-3M Neo.
from 1 € 6.30 incl. 19% VAT
€ 5.29 -
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
Spark plug B7HS
This spark plug is used for all SOLO engines.from 1 € 5.89 incl. 19% VAT
€ 4.95 -
Tension spring for turbo engine doors, double seaters
This tension spring (ref. S-4640) is used in the turbo box of the Arcus T, Arcus T edition 2020, Duo Discus T, and Duo Discus xLT.from 1 € 5.43 incl. 19% VAT
€ 4.56 -
Spring for turbo arresting cable for Ventus-2cT, -cxT and Discus-2cT
This tension spring is 1,02 x 11 x 72 mm.
It is used for the arresting cables of the Ventus-2cT, -2cxT and Discus-2cT with engine Solo 2350.
from 1 € 5.25 incl. 19% VAT
€ 4.41
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.