Hardware
-
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
Hydraulic fitting straight connection for Magura system
This connection fitting (Tost p/n 075830) is in aluminium, with standard screwing JIC04 .
This system is used for the Ventus-2c, Discus-2b and Duo Discus which are using the 5" Classic wheel from TOST with a Magura cylinder brake.
from 1 € 7.97 incl. 19% VAT
€ 6.70 -
Steel bushing for rudder cable
This steel bushing, 8x1x7 mm without hole, is used for rudder cables.
They are sold individually.
The screw (05018 LN 9037, Ref L01-0005), washer (M05 DIN 125, Ref L01-0228) and lock nut (M 5-8, DIN 985 vz, Ref L01-0703) are provided.
The EASA form one is included.
from 1 € 8.45 incl. 19% VAT
€ 7.10 -
Hexagon screw 06021,5 , LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.from 1 € 11.80 incl. 19% VAT
€ 9.92 -
Safety springs for L'Hotellier
Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.
The EASA Form 1 is included when needed.
from 1 € 11.90 incl. 19% VAT
€ 10.00 -
Eyelet at landing gear doors for all models
These eyelet is used for the landing gear doors for all models.from 1 € 14.29 incl. 19% VAT
€ 12.01 -
Hose clamp for the water ballast in the wing
The clamp is suitable for hoses with diameters ranging from 12 mm to 18 mm and is used on some gliders for the water ballast system in the wing.from 1 € 19.40 incl. 19% VAT
€ 16.30 -
Shim washer kit for 14 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 14 mm wing bolt. That includes the front and back bolts at the wing root of almost all the single seaters as well as the wing extention bolt of the Discus-2c, Ventus-2c and Ventus-3 and some winglet bolts.
These washers internal diameter is 13,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 26.99 incl. 19% VAT
€ 22.68 -
Landing gear door hinge for Arcus, Duo Discus and Nimbus-4
These hinges are used to fix the landing gear door of the Arcus, Nimbus-4 and Duo Discus.
The countersunk screws (fuselage side) and countersunk-head rivet and their washers (door side) can be ordered as an option.
from 1 € 39.41 incl. 19% VAT
€ 33.12 -
Shim washer kit for 18 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 18 mm wing bolt. That includes the front and back bolts at the wing root of the double seaters.
These washers internal diameter is 17,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 48.27 incl. 19% VAT
€ 40.56 -
Wedekind safety device KIT
Kit to secure l'hotellier connector for gliders with manual control hookups.
It cannot be used for the wing extension.
It is sold by the unit and the EASA Form 1 is included.
from 1 € 95.66 incl. 19% VAT
€ 80.39 -
Embout L'Hotellier RMZ 9. 41.2.2.2
L'hotellier connector for gliders with manual control hookups.
It is sold by the unit.
from 1 € 481.12 incl. 19% VAT
€ 404.30
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.