Spare parts
-
Ring tongue-AMP M6
Ring tongue terminal with closed barrel
- Stud size: M6 (≈ 6.73 mm)
- Wire range: 14 AWG (≈ 2 mm²)
- Insulation: Blue, partially insulated sleeve
Applications:
- Electrical power systems
- Ground connection on the wing fuel tank
- Ground connection on the nose
from 1 € 0.67 incl. 19% VAT
€ 0.56 -
Clevis G4x16 DIN 71752
Stainless steel fork head (clevis) with a 4 mm pin diameter and a 16 mm fork width, manufactured in accordance with DIN 71752.
It is used in the fuel actuation system of the Duo Discus T, Duo Discus xT, Duo Discus xLT, Arcus T, Arcus 20 T, Arcus 20 M, and Ventus-3M Neo.
from 1 € 6.30 incl. 19% VAT
€ 5.29 -
Eyelet at landing gear doors for all models
These eyelet is used for the landing gear doors for all models.from 1 € 14.29 incl. 19% VAT
€ 12.01 -
Polyflex-hose for Ventus-2 and Discus-2 using the disc brakes type Magura (Option)
This system is used for the Ventus-2 and the Discus-2 which are using the 5" Cleveland wheel from TOST and with a “Magura” cylinder brake.
Polyflex-hose is 1004 CK and it is 1080mm.
from 1 € 186.57 incl. 19% VAT
€ 156.78 -
New fuel line for TN 627-11 (for 2 Wing tanks)
This TN applies to Ventus-3M SN 031 MP and subsequent models equipped with the optional wing fuel tank(s). This kit enables you to carry out Action 3. Please read the TN carefully.
Two kits are available: this one is for a 2 wing tanks. The kit for 1 wing tank can be found in the recommended products.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
New fuel line for TN 627-11 (for 1 Wing tank)
This TN applies to Ventus-3M SN 031 MP and subsequent models equipped with the optional wing fuel tank(s). This kit enables you to carry out Action 3. Please read the TN carefully.
Two kits are available: this one is for a single wing tank. The kit for two wing tanks can be found in the recommended products.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Starter for Solo engine 2625
Solo part: 23 00 781 02
Starter from Denso for Solo engine 2625.
from 1 € 562.35 incl. 19% VAT
€ 472.56 -
Exhaust side guide plate for Arcus and Duo Discus Turbo
This plate is used for the Duo Discus T, Duo Discus xT, Duo Discus xLT, the Arcus T and Arcus T edition 2020.from 1 € 40.57 incl. 19% VAT
€ 34.09 -
Spring for Janus, Nimbus-3D, -4D flap drive
This tension spring is used to hold the flap handle in the correct position.
It was originally used on the Janus C, Nimbus-3D, and Nimbus-4D, and is located on the rear cockpit wall (back seat).
However, some gliders have been modified and now use a flat spring (Ref. B40-0297) mounted near the spar bridge.
from 1 € 43.65 incl. 19% VAT
€ 36.68
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.