Solo 2625-01i
-
Bush for engine suspension for Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
This bushing is Ø16x3x24,1.
It is used for the engine bearing of des Arcus M, Nimbus-4DM, Ventus-3M und Ventus-2cM
from 1 € 5.96 incl. 19% VAT
€ 5.01 -
EV14 fuel injectors connector plug
This plug is used for the Ventus-3M and the Arcus M Edition 2020.from 1 € 7.79 incl. 19% VAT
€ 6.55 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Cooler cap, 1,4 bar, for Solo 2625 type "i" from PVL
This lid is used for the cooler of all the Ventus-3M (Solo 2625-01i and 2625-01i neo) and all the Arcus M (Solo 2625-02i) after 2018 but not for the other version.
Please note that if the radiator of your glider is not black, you might need a different lid. Please contact Spare Parts.
from 1 € 37.56 incl. 19% VAT
€ 31.56 -
Plastic finger for propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
Its stopnut is included.
from 1 € 8.06 incl. 19% VAT
€ 6.77 -
Self sealing coupling for the Ventus-3M and Arcus M
This coupling is used for the fuel line going to the wing tank of the Ventus-3M and the Arcus M.
Please make sure you are entitled and have the skills to change that part. It should be secured with Loctite 577.
Please note: The coupling for the vent line is different.
from 1 € 85.17 incl. 19% VAT
€ 71.57 -
Brass bushings for propeller stopper for the Ventus-3M and Arcus M edition 2020
These three brass bushes are used for the propellor stopper of the Ventus-3M and the Arcus M edition 2020. The bush in the centre is 8 x 1 x 9.3 mm and the two on the side are 8 x 1 x 6.7 mm.
They can be damaged by the spring and this creates some play in the stopper.
from 1 € 23.43 incl. 19% VAT
€ 19.69 -
Throttle valve sensor for Solo 2625 01i and 02i
This throttle valve sensor mounted (Solo part number 23 00 910) is used in the Solo 2625 01i, Solo 2625 01i Neo and 2625 02i.
from 1 € 567.83 incl. 19% VAT
€ 477.17 -
propeller stopper for the Ventus-3M and Arcus M edition 2020
This stopper is used for the propellor of the Ventus-3M and the Arcus M edition 2020.
from 1 € 518.49 incl. 19% VAT
€ 435.71 -
Bracket with brake pad for propeller brake lever for Ventus-2cM, -3M, and Arcus M
This propeller brake pad is designed for the propellers of the almost all the Ventus-2cM, Ventus-3M, and all Arcus M models.
Some Nimbus-4M and Nimbus-4DM gliders may also be equipped with this system if Technical Note 868-19 has been applied.
from 1 € 27.36 incl. 19% VAT
€ 22.99 -
Slip joint for Solo 2625 type “i” exhaust system
This slip joint is used in the exhaust system of the Solo 2625-01i, 2625-01i Neo, 2625-02i and 2625-02i Neo engines, which are installed in the Ventus-3 and the Arcus gliders.
It is the Solo spare part 25 00 850.
from 1 € 907.92 incl. 19% VAT
€ 762.96 -
Starter for Solo engine 2625
Solo part: 23 00 781 02
Starter from Denso for Solo engine 2625.
from 1 € 562.35 incl. 19% VAT
€ 472.56 -
New fuel line for TN 627-11 (for 1 Wing tank)
This TN applies to Ventus-3M SN 031 MP and subsequent models equipped with the optional wing fuel tank(s). This kit enables you to carry out Action 3. Please read the TN carefully.
Two kits are available: this one is for a single wing tank. The kit for two wing tanks can be found in the recommended products.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
New fuel line for TN 627-11 (for 2 Wing tanks)
This TN applies to Ventus-3M SN 031 MP and subsequent models equipped with the optional wing fuel tank(s). This kit enables you to carry out Action 3. Please read the TN carefully.
Two kits are available: this one is for a 2 wing tanks. The kit for 1 wing tank can be found in the recommended products.
from 1 € 0.00 incl. 19% VAT
€ 0.00 -
Spark plug connector 5k Ohm - V2
This gummi piece is used to connect the spark plug in the SOLO 2625 and 2350 engines.
SOLO spare part n° 23 00 701 V1
This part was originally black, then changed to red, and has now been superseded by this new reference.
from 1 € 28.44 incl. 19% VAT
€ 23.90
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.