Main landing Gear and Front Wheel
-
Main wheel axle castle nut, M14 for double seaters
This is the castle nut is used for the main landing gear of all the Duo Discus and Arcus.
It is 8 mm, M14 x 1,5 DIN 937.
from 1 € 15.16 incl. 19% VAT
€ 12.74 -
Landing gear spring strut for all almost single seaters
This item is part of the landing gear of all the modern Schempp-Hirth single seater, with a landing gear in metall.
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with glass fiber undercarriage need another strut. It looks different but if you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 282.53 incl. 19% VAT
€ 237.42 -
Copper seal ring
This copper seal ring is 10 x 14 x 1,5 , DIN 7603 Form A.
It is used for the fuel line in the Arcus M and the Ventus-3M.
It is also used for the brakes system Tost - Magura that you might have on the Discus-2b, -2c and Ventus-2c.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Main wheel for Ventus-3
This item is composed of the rim, the tire and the inner tube. It is adapted for the Ventus-3.from 1 € 1,674.53 incl. 19% VAT
€ 1,407.17 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 0.60 incl. 19% VAT
€ 0.50 -
Landing gear assembly bolts and bushing kit for Duo Discus
This kit is made to replace the main bushes and bolts on the Duo Discus and Nimbus-4D landing gear.
It is not adapted to Duo Discus xL and Nimbus-4DL.
You can find bellow the detail list of all the parts.
This kit is likely out of stock, but you can use the drawing to order the required part through the form.
from 1 € 551.61 incl. 19% VAT
€ 463.54 -
Brake pads Beringer ZEA01
These pads are used for the Beringer brakes of the Ventus-2, Discus-2, Duo Discus XL and Arcus.
We advise you to replace the pads before the thickness of friction material reachs 1.5 mm. For more information, you can consult the maintenace manual from Beringer.
A package contains the two pads used for one wheel.
from 1 € 83.30 incl. 19% VAT
€ 70.00 -
Brake pads for Cleveland caliper 30-9
These brake lining (Tost p/n 075865) are used on brake assembly 30-9.
It can be mounted to 4′′, 5′′ and 6′′ disk brake wheels of the series Penta, Tria and Classic and on the original Cleveland brakes- wheel system.
Different system has been used and several TN have been approved. Please look carefully to your brakes and order similar brake pad.
from 1 € 72.08 incl. 19% VAT
€ 60.57 -
Hydraulic fitting straight connection for Magura system
This connection fitting (Tost p/n 075830) is in aluminium, with standard screwing JIC04 .
This system is used for the Ventus-2c, Discus-2b and Duo Discus which are using the 5" Classic wheel from TOST with a Magura cylinder brake.
from 1 € 7.97 incl. 19% VAT
€ 6.70
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.