Wing
-
![BWS-2009_Feder_für_Flexiputzer,_lo_ru[1].jpg](/uploads/tx_aimeos/1.d/preview/d/d/dd8babc5_bws-2009_feder_fur_flexiputzer-_lo_ru-1.webp?v=20240429103959)
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
O-ring Ø32 x Ø3 for water dump system of the Duo Discus xL, the Arcus, the Discus-2c and the Ventus-2cx
This O-ring Ø32 x Ø3 is used for the water dump valve of several gliders:
- the Duo Discus x and xL,
- all the Arcus,
- some Discus-2c (the system has been upgraded in 2005),
- the Ventus-2cx and the Ventus-2cxa for the inner wing dump system not the outer wing.
from 1 € 0.55 incl. 19% VAT
€ 0.46 -
Compression spring for airbrake (straight shape)
This spring is designed for the airbrakes of all Schempp-Hirth gliders.
The spring is 0.8 mm x 7.8 mm x 30 mm.
Depending on your glider model, each airbrake may require between 9 and 11 of these springs.
Important Note: The exterior springs often differ from this ones. You can find the suitable exterior springs (ref L03-0032) among our suggested products.
from 1 € 0.51 incl. 19% VAT
€ 0.43 -
Compression spring for airbrake (conical)
This spring is designed for the airbrakes of all Schempp-Hirth gliders ecxcept the Ventus-3.
The spring is 1 x 10 x 30 mm.
Depending on your glider model, each airbrake may require 2 of these springs.
Important Note: This spring is used on the outside of the airbrakes. The other spring are straight (ref L03-0033). You can find them among our suggested products.
from 1 € 0.73 incl. 19% VAT
€ 0.61 -
Airbrake drive funnel
This drive funnel is used on almost all Schempp-Hirth gliders except the Nimbus-4 and the Ventus-3.
Two lock nuts M 6-8, DIN 985 and a lock nut M6 TRELOC, DIN 439 are included. However, your glider has a specific set of distance washer that are not provided. Please before disassemble the funnel make sure you know which washer go where.
On the Ventus-2 and Discus-2c, you may also need a set of screws that can be baught as an option.
from 1 € 258.12 incl. 19% VAT
€ 216.91 -
Wingtip skid for all Duo Discus
This skid is 194 x 47 x 37 mm and is used for all Duo Discus.
Double face tape is already fixed on the skid to make it easy to instal.
from 1 € 86.81 incl. 19% VAT
€ 72.95 -
Wingtip skid for Discus-2
This skid is 164 x 48 x 36 mm is used for the Discus-2a, -2b and 2-c.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 34.00 incl. 19% VAT
€ 28.57 -
Wingtip skid for Discus, Ventus and Ventus-2
This skid is 121 x 35 x 28,5 mm and is used for Discus a, Discus b, Ventus b, Ventus c and all the Ventus-2.
Double face tape is already fixed on the skid to instal it easily.
from 1 € 38.26 incl. 19% VAT
€ 32.15 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.