Spare parts
-
Oxygen-bottle holder for gliders with engine
This oxygen bottle holder is suitable for a majority of gliders equiped with a turbo or a motor.
Please choose which holder you need according to your Oxygen-bottle diameter. It is possible to adjust the holder at +/- 2 mm.
In single-seaters, one of the screws of the support is often above the spar bridge, where the wall is relatively thin. It is therefore often necessary to add the washer B40-2218 (see suggested products).
from 1 € 228.86 incl. 19% VAT
€ 192.32 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 214.47 incl. 19% VAT
€ 180.23 -
Oxygen-bottle neck-holder
This oxygen bottle support is suitable for a majority of Schempp-Hirth gliders.
Please choose the diameter of your oxygen bottle. If your bottle has a diameter that is not in the list, please contact Schempp-Hirth spare part.
Please note that for some bottle (like the "Montain High"), you will need an extender to shift the pressure gauge away from the bottle neck.
from 1 € 214.20 incl. 19% VAT
€ 180.00from 1 € 214.20 incl. 19% VAT
€ 180.00 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84 -
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
Coolant hoses set for SOLO 2625 02
This hose set is designed for use with the Solo 2625 02 and 02i engines in the Arcus M and Arcus M edition 2020 gliders.from 1 € 201.01 incl. 19% VAT
€ 168.92 -
Landing gear pneumatic tension spring for Duo Discus XL und Arcus with a TOST wheel
This gaz strut is 210N and it is used for the landing gear on the Arcus and Duo Discus XL.
Important: It is not adapted for Beringer wheels.
Two models exist. The pivot ball was first associated with a M5 screw, before beeing replace by a M6 screw in 2015. Please measure the diameter of the screw on the part that you are currently using, and order the same.
An assembly jig for the tension pneumatic spring can be added as an option. If you don't have one, we advise you to buy it.
from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 193.02 incl. 19% VAT
€ 162.20from 1 € 189.33 incl. 19% VAT
€ 159.10
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.