Spare parts
-
Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake
This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.
The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69 -
Pneumatic tension spring for the Duo Discus x and xL airbrake
This 300N gas strut is located in the fuselage. It connects to the airbrake drive shaft in the Duo Discus x and xL.
If the airbrakes become very hard to operate, it may be that this gas strut needs to be replaced.from 1 € 27.06 incl. 19% VAT
€ 22.74 -
Elevator-bell crank
This item is part of the horizontal tailplane actuation system of all modern Schempp-Hirth gliders.
Please note that the Cirrus is equipped with a slightly different model. If you are unsure which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 83.73 incl. 19% VAT
€ 70.36 -
Fuel tube for double seater with turbo
This fuel tube is use for the Nimbus-4D T, the Duo Discus T, Duo Discus xL T and the Arcus T.from 1 € 162.95 incl. 19% VAT
€ 136.93 -
Handle Fixation Kit to the canopy lock connecting rods
This set consists of:
- Brass bushing 8 x 1.5 x 6.2; Ref.: B40-1571
- Countersunk screw M5x16 - 8.8; ISO 10642 Ref.: L01-1012
- Polystop nut M5-8 DIN 985; Ref.: L01-0703
- Washer 5x10x0.5 mm DIN 988; Ref.: L01-0390
This set contains all the parts required to attach the handle to the connecting rod.
Note: An additional set is required to attach the handle to the canopy frame.from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Handle Fixation Kit to Canopy Frame
This kit is composed of:
- Shim washer 6 x 12 x 0.5; ref: B40-1479
- Brass bush 8 x 1 x 11.1; ref: B40-0438
- Polystop nut M6-8 DIN 985; ref: L01-0129
- Spring washer B8 DIN 137; ref: L01-0967
This kit contains all the hardware required for the fixation of the handle to the canopy frame.
Note: another set is required to fix the handle to the rode.
from 1 € 5.95 incl. 19% VAT
€ 5.00 -
Tension spring for Discus trim system
Tension Spring for the Discus-2 Trim System, Part No.: RZ-123 I
Tension spring for the trim system of the Discus-2 series. 3 springs are required per aircraft.
It is Ø 1,6 x 14,1 x 59 mm
from 1 € 2.59 incl. 19% VAT
€ 2.18 -
Rod end bearing 10c6 M8x58
Rod end bearing with a 10c6 head and M8x58 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 15.90 incl. 19% VAT
€ 13.36 -
Landing gear guide plate for Duo Discus xL and Arcus
This grey PVC plate is used as a guide for the Duo DiscusxL and xLT and Arcus.
Dimensions: 233×25 mm.
Please note: the model used for the Duo Discus and Nimbus-4D is shorter (ref. B40-3305). You can find it in the suggested products below.
from 1 € 13.47 incl. 19% VAT
€ 11.32
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.