Shop

Spare parts

products 1-9 of 343
Products per page
Sort by
New Sale

Bearing bracket for elevator bell crank

This item is used to fix the elevator bell crank to the fuselage on almost all Schempp-Hirth gliders.

Screws and washers are provided.
from 1 € 68.01 incl. 19% VAT
€ 57.15
New Sale

Brake pull cable for the front seat of the Arcus and Duo Discus XL with Magura-type disc brake

This cable is designed for the front seat of the Arcus, Duo Discus x, and Duo Discus xL equipped with a TOST wheel and a Magura cylinder brake.

The brake cable is 600 mm long, with a diameter of Ø1.5 mm, and is fitted with a 9 mm diameter nipple.

Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.

The EASA Form one is included.
from 1 € 49.61 incl. 19% VAT
€ 41.69
New Sale

Pneumatic tension spring for the Duo Discus x and xL airbrake

This 300N gas strut is located in the fuselage. It connects to the airbrake drive shaft in the Duo Discus x and xL.


If the airbrakes become very hard to operate, it may be that this gas strut needs to be replaced.
from 1 € 27.06 incl. 19% VAT
€ 22.74
New Sale

Elevator-bell crank

This item is part of the horizontal tailplane actuation system of all modern Schempp-Hirth gliders.

Please note that the Cirrus is equipped with a slightly different model. If you are unsure which model you need, please contact Schempp-Hirth Spare Part.


from 1 € 83.73 incl. 19% VAT
€ 70.36
New Sale

Fuel tube for double seater with turbo

This fuel tube is use for the Nimbus-4D T, the Duo Discus T, Duo Discus xL T and the Arcus T.
from 1 € 162.95 incl. 19% VAT
€ 136.93
New Sale

Handle Fixation Kit to the canopy lock connecting rods

This set consists of:

  • Brass bushing 8 x 1.5 x 6.2; Ref.: B40-1571
  • Countersunk screw M5x16 - 8.8; ISO 10642 Ref.: L01-1012
  • Polystop nut M5-8 DIN 985; Ref.: L01-0703
  • Washer 5x10x0.5 mm DIN 988; Ref.: L01-0390

This set contains all the parts required to attach the handle to the connecting rod.
Note: An additional set is required to attach the handle to the canopy frame.
from 1 € 5.95 incl. 19% VAT
€ 5.00
New Sale

Handle Fixation Kit to Canopy Frame

This kit is composed of:

  • Shim washer 6 x 12 x 0.5; ref: B40-1479
  • Brass bush 8 x 1 x 11.1; ref: B40-0438
  • Polystop nut M6-8 DIN 985; ref: L01-0129
  • Spring washer B8 DIN 137; ref: L01-0967

This kit contains all the hardware required for the fixation of the handle to the canopy frame. 

Note: another set is required to fix the handle to the rode.
from 1 € 5.95 incl. 19% VAT
€ 5.00
New Sale

Tension spring for Discus trim system

Tension Spring for the Discus-2 Trim System, Part No.: RZ-123 I

Tension spring for the trim system of the Discus-2 series. 3 springs are required per aircraft.

It is  Ø 1,6 x 14,1 x 59 mm

 
from 1 € 2.59 incl. 19% VAT
€ 2.18
New Sale

Rod end bearing 10c6 M8x58

Rod end bearing with a 10c6 head and M8x58 length body.

Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 15.90 incl. 19% VAT
€ 13.36
products 1-9 of 343
Products per page
Sort by

Help, my spare part is not yet in the shop!

If you cannot find the item you want please use the spare-part form and we will come back to you shortly.