Spare parts
-
GFRP-cover for Ventus-3M starter ring gear, TN 627-5
This GFRP-cover (G000168) is used for the TN 627-5.
That is recommanded for the Ventus-3M (SN < 183).
Please read carefully the Technnical Note.
from 1 € 213.43 incl. 19% VAT
€ 179.35 -
Horizontal tailplane fitting, snap lock
This item is part of the stabilizer fixation of all the modern Schempp-Hirth gliders.
It is possible to replace or change it for a bigger pin diameter to compensate the ageing of the parts on the stabilizer.
This item is delivered with 4 allen screw M06x30 - 8.8, DIN 912 / ISO 4762 galvanized (L01-0119) and 4 Schnorr-safety washer M6 (L01-0378).
from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84from 1 € 214.01 incl. 19% VAT
€ 179.84 -
Oxygen-bottle neck-holder
This oxygen bottle support is suitable for a majority of Schempp-Hirth gliders.
Please choose the diameter of your oxygen bottle. If your bottle has a diameter that is not in the list, please contact Schempp-Hirth spare part.
Please note that for some bottle (like the "Montain High"), you will need an extender to shift the pressure gauge away from the bottle neck.
from 1 € 214.20 incl. 19% VAT
€ 180.00from 1 € 214.20 incl. 19% VAT
€ 180.00 -
fuelling hose, assembled, all models
This hoses are assembled with a filter and the connections to refuel your glider.
from 1 € 214.47 incl. 19% VAT
€ 180.23 -
The classic Schempp-Hirth tailwheel,
200x50This is the original Schempp-Hirth tailwheel. It is used in almost all gliders except for the steerable wheel of the Ventus-2cM, Quintus, Arcus M and Ventus-3 Performance.
Two models are available. This one does not contain leid and weights 0,930 kg. The other model is golden-coloured and can weight 2,6 or 3,6 kg. Please, order the model that is already on your glider or do a new weight and balance measurement.
from 1 € 224.99 incl. 19% VAT
€ 189.07 -
Oxygen-bottle holder for gliders with engine
This oxygen bottle holder is suitable for a majority of gliders equiped with a turbo or a motor.
Please choose which holder you need according to your Oxygen-bottle diameter. It is possible to adjust the holder at +/- 2 mm.
In single-seaters, one of the screws of the support is often above the spar bridge, where the wall is relatively thin. It is therefore often necessary to add the washer B40-2218 (see suggested products).
from 1 € 228.86 incl. 19% VAT
€ 192.32 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN before 339)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is after SN 338, please use the kit for engine Solo 2350 (SN>338).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 230.32 incl. 19% VAT
€ 193.55 -
Kit for 5-year-special inspection, SOLO turbo 2350 (SN after 338)
In this kit, you will find all you need for the 5 years inspection of your engine SOLO 2350: Spark plugs, Spark plugs cap, gaskets...
If your engine is before SN 339, please use the kit for engine Solo 2350 (SN<339).
This kit is not adapted for the SOLO 2350c and 2350d.
from 1 € 230.32 incl. 19% VAT
€ 193.55 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 234.23 incl. 19% VAT
€ 196.83 -
Landing gear retraction lever
This is part, with the fork, of the landing gear retraction system of the Discus, Discus-2, Ventus and Ventus-2 (except for the Ventus-2cxa and for all the fuselages "a"). It is also used for the Nimbus-2, -3 and -4 single seater and for the mini-Nimbus.
This mechanism also requires a steel bushing and an axle which are sold separately.
from 1 € 236.57 incl. 19% VAT
€ 198.80 -
Battery box for modern double seaters with engine
This battery holders is installed on the rear side of the front pilot seat, close to the aft pilot’s leg area.
The metalic bracket is available in the suggested products section at the bottom of the page.
from 1 € 255.01 incl. 19% VAT
€ 214.29 -
Fin tank valve for Arcus, Duo Discus xL and Nimbus-4DL
This is the complete tank dump valve assembly. It is used for Arcus, Duo Discus xL and Nimbus-4DL.
Single seaters have another model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our spare part team.
from 1 € 263.34 incl. 19% VAT
€ 221.29 -
Rubber skid for all gliders
This rubber skid is 330 x 70mm and it is adapted to all Schempp-Hirth gliders including Cirrus and Nimbus.
from 1 € 269.70 incl. 19% VAT
€ 226.64 -
V-belt for Arcus M SOLO 2625-02i
This item is 1 set of 5 pieces.
SOLO spare-part n° 00 57 224
from 1 € 273.51 incl. 19% VAT
€ 229.84 -
Elektret gooseneck microphone
This microphone is adapted to radio with electret input.
Mounting kit is included in the price.
from 1 € 282.07 incl. 19% VAT
€ 237.03 -
Landing gear spring strut for all almost single seaters
This item is part of the landing gear of all the modern Schempp-Hirth single seater, with a landing gear in metall.
Careful: some Ventus c, Ventus-2a, Ventus-2b and Discus-2b with glass fiber undercarriage need another strut. It looks different but if you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
from 1 € 282.53 incl. 19% VAT
€ 237.42 -
Elevator U-bracket
This item is part of the elevator control and horizontal tailplane fixation back system of all the modern Schempp-Hirth gliders. Please note that the first gliders with that system (like the first Nimbus-2b) as well as the Discus CS have been equipped with a slightly different models. If you are not sure of which model you need, please contact Schempp-Hirth Spare Part.
When you remove the previous U-bracket, keep the screws! If they are not damaged, we advise you to use them again. However, we are providing new lock washers.
If you also need the screws, the reference are: 2x 6k screws 06036 LN 9037 and 4x 6k screws M06x18 - 8.8 DIN933 / ISO 4017 (See suggested products).
from 1 € 288.11 incl. 19% VAT
€ 242.11 -
Tyre 5" thin (336x115) 10pr
This tire (Tost p/n 065221 ) is a special 5" made by TOST AERO for the Discus-2b, -2c, the Ventus-2c and the Ventus-3 . It is a bit smaller than a classic 5" so the tyre is not touching the landing gear box.
from 1 € 316.16 incl. 19% VAT
€ 265.68 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Pre-assembled fuel line for TN 627-6
The TN 627-6 is recommended for the Ventus-3M (SN < 193) with a Solo engine 2625 01i with the new throttle or equipped with the 2625 01i Neo.
Please read carefully the Technnical Note.
Tests on powered gliders with engine SOLO 2625 01i equipped with the new throttle system (SOLO TM 4600-9) or with engine SOLO 2625 01i neo have shown that a changed position for the connection of the fuel line to the throttle system leads to a more even fuel supply to both cylinders. According to previous experience, this change improves the power output of the engine especially under unfavourable ambient conditions.
from 1 € 318.99 incl. 19% VAT
€ 268.06 -
Tube 5.00-5 (and 6.00), TR67
This tube fits 5.00 and 6.00 tyres.
Its long valve is adapted for the double seaters, except if they have a TOST Penta wheel.
It is also used for the single seater with a 5" wheel equiped with a TOST drum brakes like the Kobold 5".
You can find the tube 5.00-5, TR87, with a sort valve, in the suggested products.
This item is discontinued until further notice. We are sorry for the inconvenience.
from 1 € 325.57 incl. 19% VAT
€ 273.59
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.