Spare parts
-
Landing gear door hinge for single seater
These hinges are used to fix the landing gear door of almost all single seater.
Their dimensions are: 30 x 30 x 0,8 mm
The countersunk screws (fuselage side) and countersunk-head rivet with their washers (door side) can be ordered as an option.
from 1 € 1.87 incl. 19% VAT
€ 1.57 -
Hose clamp for the rudder pedal cable
The clamp is suitable for hoses with diameters ranging from 6 mm to 7 mm and is used on some gliders for the rudder pedal cable.from 1 € 1.87 incl. 19% VAT
€ 1.57 -
Red LED for fire warning 10 mm
This LED is blinking in RED. It has been use for gliders with Motor and FES.
A few old FES might have had an 8mm LED, it is not available anymore. You will also need to change the support to the new one (Ref: E11-014). Please contact the spare part team using the online Form.
from 1 € 2.12 incl. 19% VAT
€ 1.78 -
Landing gear door spring
The tension spring Z-109AI is used for the single seater landing gear doors.
Its dimensions are 77 x 11 x 11 mm
from 1 € 2.17 incl. 19% VAT
€ 1.82 -
Splint pin 3,2 x 40 for main wheel axle
This splint is used for the main landing gear of almost all Discus, Discus-2, Ventus-2 as well as the Ventus-3.
It is 3,2 x 40 ISO 1234.
from 1 € 2.38 incl. 19% VAT
€ 2.00 -
Rubber buffer 25x10, M6x10 for the E-Box / radiator
This silent block is used for the cooler of the Ventus-2cM, Nimbus-4DM, all Arcus M, all Ventus-3M and the Quintus.
The head is 10 mm and the screw 10 mm. Its head diameter is 24 mm. Look at the model(s) that you want to replace and order the same.
from 1 € 2.74 incl. 19% VAT
€ 2.30 -
Shrink hose CGPT-12.7/6.4-0
This high-quality, flexible shrink tubing is used for insulation and protection of cables and connections – including many fuel lines and some electronic components.
Minimum diameter before shrinking: 12.7 mm
Diameter after shrinking: 6.4 mm
It is sold by the meter.
from 1 € 2.77 incl. 19% VAT
€ 2.33 -
O-Ring for wing wheel Lindner of the Duo Discus, Discus and the Ventus, Ø60
This gummi ring is Ø60 x Ø10 and is the tire of the wing wheel Lindner of the Duo Discus, Discus and the Ventus.
It is sold by the unit.
from 1 € 2.89 incl. 19% VAT
€ 2.43 -
Rubber buffer 20x15, M6x10 for the radiator of Arcus M and Ventus-3M.
This silent block is used for the cooler of the Arcus M, Ventus-3 and Quintus engine.
The head is 15 mm and the screw 10 mm. Its diameter is 20 mm. Look at the model(s) that you want to replace. According to your glider, you might also need this rubber buffer.
from 1 € 3.06 incl. 19% VAT
€ 2.57 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
Black T-handle
from 1 € 3.34 incl. 19% VAT
€ 2.81 -
Perspex disc 78,3 mm with 5 mm hole
This perspex disc is made for Arcus, all Duo Discus, Ventus-3, Discus-2b, -2c, Discus b and cs.
However, some gliders have more than one perspex disc and they can be different. Please look at the diameter and model you need.
Its diameter is 78,3 mm and the central hole is 5 mm.
from 1 € 3.65 incl. 19% VAT
€ 3.07 -
Distance gummi for propeller blade on the Duo Discus T, Duo Discus XLT and Arcus T
Two models exist, with or without a base, please choose the model who is already on your glider.
They are 10 mm high.
They are sold individually but you will need 5 of them for your glider.
from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 3.80 incl. 19% VAT
€ 3.19from 1 € 14.03 incl. 19% VAT
€ 11.79 -
Karcoma fuel filter
This fuel filter Karcoma 99.106/8-100 is used for the refuelling and fuel hoses.
It is 80 mm long and its diameter is 30 mm.
from 1 € 3.83 incl. 19% VAT
€ 3.22 -
Hexagon screw 06032, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 3.96 incl. 19% VAT
€ 3.33 -
Rain protection cap for spark plug
This piece is used to protect the spark plug from the rain in the SOLO 2350 engine.
SOLO spare part n° 00 84 203
from 1 € 4.01 incl. 19% VAT
€ 3.37 -
O-Ring Ø68 x Ø07,00mm NBR 70 for the propeller of the single seater with turbo Solo 2350
from 1 € 4.08 incl. 19% VAT
€ 3.43 -
O-Ring for the wing wheel Lindner of the Arcus, Ø80 x Ø10
This rubber ring is Ø80 x Ø10 and it is the tire of the wing wheel Lindner of the Arcus.
from 1 € 4.16 incl. 19% VAT
€ 3.50 -
O-ring Ø90 x Ø7mm NBR70 for Duo Discus T, Duo Discus XLT and Arcus T propeller
from 1 € 4.39 incl. 19% VAT
€ 3.69 -
Control cable A 1,6 mm
Control cable A, 1.6 mm, ISO 2020 (1/16”), DIN 3051 compliant, 7x7 construction
Sold by the meter.
This cable is often used for the turbo engine decompression system and fin tank control. Please refer to your maintenance manual to determine the correct cable type and connection instructions.
It is also commonly used for rudder pedal adjustment. For this application, we recommend purchasing the "Kit for rudder pedal adjustment ".
from 1 € 4.49 incl. 19% VAT
€ 3.77 -
elevator-trim blade spring for Arcus, all Duo Discus, all Nimbus-4D and all Discus
This spring is used for the trim of the Arcus, Duo Discus XL, Nimbus-4DL and all the Discus from the Discus a to the Discus-2c.
It is 25mm lage and the legs are 40mm long. The central part is 12,5mm.
Some glider need roll pins. They are not included but they can be baught individaly (see the suggested products).
from 1 € 4.65 incl. 19% VAT
€ 3.91
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.