Tail
-
Hexagon Screw 06036, LN 9037
This 6k-screw is used for the elevator drive U-bracket.
from 1 € 1.71 incl. 19% VAT
€ 1.44 -
Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017
This 6k-Screw is used for the elevator drive U-bracket.from 1 € 0.36 incl. 19% VAT
€ 0.30 -
Single seater horiz. tailplane sealing for Ventus-3 Sport
This sealing is critical to limit the ageing of the horizontal tailplane fixation mechanisms. We advise you to renew it every couple of years.
The form is 94,98 x 370,00 mm. It is designed for the Discus-2a, -2b and the Ventus-3 Sport. It may also be possible to adapt it for older gliders. If you prefer, you can make the form yourself using a Tesa Foam roll.
from 1 € 13.52 incl. 19% VAT
€ 11.36 -
Schnorr-safety washer
Safety washers Form S available in M6 and M8.
These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40 -
Allen screw M06x21 - 8.8, DIN 912 galvanized
This screw is mainly used to secure the rear part of the horizontal tail fitting.from 1 € 3.20 incl. 19% VAT
€ 2.69 -
washer 6,4, DIN 9021 / ISO 7093-1 galvanized
This washer is mainly used on the rear part of the horizontal tail fitting.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Fin tank valve for all single seaters (exc. Ventus-3)
This is the complete tank dump valve assembly. It is used for all single seaters except for the Ventus-3.
Arcus and Duo Discus xL have other model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our sparepart team.
from 1 € 213.13 incl. 19% VAT
€ 179.10 -
Fin tank valve for Arcus, Duo Discus xL and Nimbus-4DL
This is the complete tank dump valve assembly. It is used for Arcus, Duo Discus xL and Nimbus-4DL.
Single seaters have another model. See suggested products below. For first generation Duo Discus, Janus, Nimbus-3D and -4D, please contact our spare part team.
from 1 € 190.19 incl. 19% VAT
€ 159.82 -
Special screw for Arcus M and Ventus-3M tailwheel axle
This M8 screw is design for the steering tail wheel axle of the Arcus-M and the Ventus-3M.
from 1 € 17.87 incl. 19% VAT
€ 15.02 -
Tailwheel axle for Arcus M and Ventus-3M
This axle is design for the steering tail wheel of the Arcus-M and the Ventus-3M.
from 1 € 22.54 incl. 19% VAT
€ 18.94 -
Distance washer for tailwheel
This washer is 16 x 2 x 4,5 mm and it is used for the tail wheel
from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Distance washer for mainwheel
This washer is 14 x 2 x 32 mm and it is used for the main wheel of almost all Schempp-Hirth gliders.from 1 € 8.10 incl. 19% VAT
€ 6.81 -
Horizontal tailplane Arcus edition 2020 - for upgrade
Get the updated design of the Arcus "20" with enhanced performances and handling for your original Arcus!Part of the design upgrade is the new Horizontal Tailplane Arcus "20" we offer finished in PU paint.Installation requires modification of the vertical to horizontal tailplane junction area.This work requires professional lamination and adjustment before refinish to get a proper "Release of Service" for your glider.Please contact professional Service and Repair stations.You can also request and book a slot with our SH Service and Repair in Nabern: service(a)schempp-hirth.comIn order to complete your order we will need the precise type (T or M) and serial number of your Arcus. You can enter it below.
from 1 € 8,211.00 incl. 19% VAT
€ 6,900.00 -
Washer Ø12,1XØ17X1,5 for the tailwheel axle
This washer is used for some Schempp-Hirth tailwheel axle with the original 200x50 with or without led.
It is Ø12,1XØ17X1,5.
from 1 € 0.94 incl. 19% VAT
€ 0.79 -
Distance washer for tailwheel
This washer is 16 x 2 x 5,5 mm and it is used for the tail wheel.from 1 € 17.62 incl. 19% VAT
€ 14.81 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00 -
Elevator transition for all Discus-2, select Ventus-2, and the Ventus-3
This part can be adapted to fit the Discus-2a, Discus-2b, Discus-2c, Ventus-2ax, Ventus-2bx, the ventus-2c, the ventus-2cx and the Ventus-3.
It measures 148 mm in width.
Please note that you will need to cut the part to ensure it fits your glider, as it is sold in an untrimmed form.
from 1 € 104.42 incl. 19% VAT
€ 87.75 -
Tail wheel cover for single seater version sport
This cover is designed to fit the TOST Mini 150 wheel.
If your glider is currently equipped with a classic Schempp-Hirth tailwheel, you can upgrade to the more compact TOST Mini 150. To make this conversion, you'll need this cover, a TOST Mini wheel, and a set of washers. All required components are listed below.
from 1 € 316.67 incl. 19% VAT
€ 266.11 -
Tail wheel axle distance washer kit
This kit includes a wide selection of spacer washers for tail wheel axle, measuring 16 x 2 mm with widths ranging from 1.5 to 6 mm. It is particularly useful if you plan to switch from a classic tailwheel to a mini version. Compatible with most gliders, except for the Arcus M, Ventus-3M, and Cirrus.from 1 € 121.43 incl. 19% VAT
€ 102.04 -
Elevator transition for Duo Discus, Arcus and Nimbus-4D
This part can be adapted to fit the Duo Discus, Duo Discus X, Duo Discus XL, as well as the Arcus, Arcus Edition 2020, and Nimbus-4D.
It measures approximately 147 mm in width and 157 mm in length.
Please note that the part is sold in an untrimmed form, so you will need to cut it to ensure a proper fit for your glider.
from 1 € 165.68 incl. 19% VAT
€ 139.23
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.