Wing
-
Leg spring for water dump system for Mini-Nimbus, Duo Discus, Ventus-2c and Ventus-3
These springs are used for the water dump system on the Mini-Nimbus, Duo Discus, Ventus-2c and Ventus 3.
It is 99,5 mm long and the diameter of the coiled is 15 mm. The steel wire diameter is 1,5 mm.
from 1 € 5.90 incl. 19% VAT
€ 4.96 -
Water filler cap sealing for Ventus-3
This sealing is made for the Ventus-3 sealing caps.
Its diameter is 26 mm and the sealing is 4,0mm thick.
from 1 € 8.19 incl. 19% VAT
€ 6.88 -
Water filler cap top
This plug is 5 mm high and its diameter is 36 mm. It fit all the Ventus 2, Discus 2, Nimbus 3, Duo Discus and the first Arcus.
Dependant on the glider, older Ventus and Discus can need this model or a 35 mm diameter sealing cap that is 7,5 mm high. Please look at your current model to order the same. If you need the thick sealing cap, you can order it through Schempp-Hirth spare-part form.
For a clean fit, the cover should be adjusted by grinding the profile contour.
from 1 € 9.64 incl. 19% VAT
€ 8.10 -
![BWS-2009_Feder_für_Flexiputzer,_lo_ru[1].jpg](/uploads/tx_aimeos/1.d/preview/d/d/dd8babc5_bws-2009_feder_fur_flexiputzer-_lo_ru-1.webp?v=20240429103959)
BWS springs for Flexiwiper
These springs are uses for the BWS flexiwiper.
We sell them as a pair to replace the top and bottom springs of one Flexiwiper.
from 1 € 12.38 incl. 19% VAT
€ 10.40 -
Aileron drive cover for Duo Discus
from 1 € 13.80 incl. 19% VAT
€ 11.60 -
Leg springs for water dump system for Arcus, Duo Discus XL and Ventus-2cx
This pair of leg springs is used for the Arcus, Duo Discus xL and Ventus-2cx.
Each spring is 101,5 mm long and 21 mm large.
from 1 € 13.83 incl. 19% VAT
€ 11.62 -
Perspex disc 53,5 mm with 5 mm hole
This perspex disc is made for the Ventus-2a.
Its diameter is 53,5 mm and the central hole is 5 mm.
from 1 € 16.79 incl. 19% VAT
€ 14.11 -
spherical bearing GL 18
This spherical bearing is adapted for 18mm diameter pin of the double seaters.
The internal diameter is 18 mm and the part is 32x32x14 mm.
from 1 € 17.06 incl. 19% VAT
€ 14.34 -
Shim washer kit for 14 mm wing bolt
These washers are used to adapt the distance of the wing to the fuselage. The kit contains eight 0,5 mm thick washers and four 0,8 mm thick washers.
They fit a 14 mm wing bolt. That includes the front and back bolts at the wing root of almost all the single seaters as well as the wing extention bolt of the Discus-2c, Ventus-2c and Ventus-3 and some winglet bolts.
These washers internal diameter is 13,8 mm. They are a bit smaller than the pin in order to stay in place when installed.
from 1 € 18.61 incl. 19% VAT
€ 15.64
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.