Shop

Hardware

products 22-42 of 46
Products per page
Sort by
New Sale

Embout L'Hotellier RMZ 9. 41.2.2.2

L'hotellier connector for gliders with manual control hookups.

It is sold by the unit.
from 1 € 453.89 incl. 19% VAT
€ 381.42
New Sale

Wedekind safety device KIT

Kit to secure l'hotellier connector for gliders with manual control hookups.

It cannot be used for the wing extension.

It is sold by the unit and the EASA Form 1 is included. 
from 1 € 95.66 incl. 19% VAT
€ 80.39
New Sale

Safety springs for L'Hotellier

Pair of safety springs to secure l'hotellier connectors for gliders with manual control hookups.

The EASA Form 1 is included when needed.


from 1 € 11.90 incl. 19% VAT
€ 10.00
New Sale

Safety ring-spring steel, DIN471, size 12

This safety ring-spring steel, DIN471, size 12 is used to secure the tailwheel axle of, almost, all Schempp-Hirth gliders.
from 1 € 0.24 incl. 19% VAT
€ 0.20
New Sale

Screw for the seat pan

This oval countersunk head screw is used for the seat pan.

It is size M 5 x 16.


from 1 € 0.24 incl. 19% VAT
€ 0.20
New Sale

Hexagon Screw 06036, LN 9037

This 6k-screw is used for the elevator drive U-bracket.
 
from 1 € 1.71 incl. 19% VAT
€ 1.44
New Sale

Hexagon Screw M06x18 - 8.8, DIN 933 / ISO 4017

This 6k-Screw is used for the elevator drive U-bracket.
from 1 € 0.36 incl. 19% VAT
€ 0.30
New Sale

Safety ring-spring steel, DIN471, size 8

This safety ring-spring steel, DIN471, size 8 is used to secure the Lindner wingtip wheel axle.
from 1 € 0.55 incl. 19% VAT
€ 0.46
New Sale

Self lock nut M6-8 and M8-8

Safety nut, DIN 985 galvanized

Availabe in thread size M6 or M8.


from 1 € 0.24 incl. 19% VAT
€ 0.20
from 1 € 2.38 incl. 19% VAT
€ 2.00
from 1 € 0.24 incl. 19% VAT
€ 0.20
from 1 € 0.24 incl. 19% VAT
€ 0.20
New Sale

Roll pin for aileron

These roll pins are used to secure the aileron.

Dimension: 2 x 10 mm

DIN 1481 / ISO 8752
from 1 € 0.36 incl. 19% VAT
€ 0.30
New Sale

Washer M06 galvanized, DIN 125 / ISO 7090 Form B

Washer M06 galvanized, DIN 125 / ISO 7090 Form B
from 1 € 0.24 incl. 19% VAT
€ 0.20
New Sale

Roll pin for trim

Roll pin DIN 1481 / ISO 8752 stainless.

They are (mainly) used to in trim of the Arcus, Duo Discus XL and Nimbus-4DL.

There is two models : On gliders produced after April 2015, you will probably need the 2 x 16 mm model. For the older glider you will need to use the 2x14 mm roll pins. Please have a look in your glider to confirm which models you need.

 
from 1 € 0.36 incl. 19% VAT
€ 0.30
New Sale

Schnorr-safety washer

Safety washers Form S available in M6 and M8.

These washers are used, among other things, to secure the rear part of the horizontal tail fitting and the elevator drive U-bracket.
from 1 € 0.48 incl. 19% VAT
€ 0.40
New Sale

Allen screw M06x21 - 8.8, DIN 912 galvanized

This screw is mainly used to secure the rear part of the horizontal tail fitting.
from 1 € 3.20 incl. 19% VAT
€ 2.69
New Sale

washer 6,4, DIN 9021 / ISO 7093-1 galvanized

This washer is mainly used on the rear part of the horizontal tail fitting.
from 1 € 0.24 incl. 19% VAT
€ 0.20
New Sale

Hexagon screw 08025, LN 9037

This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
 
from 1 € 7.27 incl. 19% VAT
€ 6.11
New Sale

Hexagon screw 06020, LN 9037

This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.
from 1 € 1.58 incl. 19% VAT
€ 1.33
New Sale

Hexagon screw 06021,5 , LN 9037

This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.
from 1 € 11.25 incl. 19% VAT
€ 9.45
New Sale

 Hexagon screw 06032, LN 9037

This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.
from 1 € 3.96 incl. 19% VAT
€ 3.33
New Sale

DZUS-quick fastener pin, Nextel painted

This quarter-turn lock is size 6, made in steel and with a left-hand thread. 
 

This modell is Nextel painted, you can find the raw one bellow with the suggested products.

It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.


from 1 € 7.73 incl. 19% VAT
€ 6.50
New Sale

Self-locking hexagonal-head nut, M8, DIN 14441

This slotted hexagonal-head nut, M8, DIN 14441 is copper plated  and is commonly used for rudder fixation.
from 1 € 0.24 incl. 19% VAT
€ 0.20
products 22-42 of 46
Products per page
Sort by

Help, my spare part is not yet in the shop!

If you cannot find the item you want please use the spare-part form and we will come back to you shortly.