Hardware
-
Hexagon screw 08025, LN 9037
This 6k-Screw is mainly used at the rear part of the horizontal tail fitting.
from 1 € 7.27 incl. 19% VAT
€ 6.11 -
Hexagon screw 06020, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 1.58 incl. 19% VAT
€ 1.33 -
Hexagon screw 06021,5 , LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2c and Discus-2c.from 1 € 11.25 incl. 19% VAT
€ 9.45 -
Hexagon screw 06032, LN 9037
This 6k-Screw is used for the airbrake drive funnel of the Ventus-2 and Discus-2c.from 1 € 3.96 incl. 19% VAT
€ 3.33 -
DZUS-quick fastener pin, Nextel painted
This quarter-turn lock is size 6, made in steel and with a left-hand thread.
This modell is Nextel painted, you can find the raw one bellow with the suggested products.
It is not adapted to all system. Please have a look and if your glider is equipped with the S-shaped system, order the reference L01-0045 via the spare part online form.
from 1 € 7.73 incl. 19% VAT
€ 6.50 -
Self-locking hexagonal-head nut, M8, DIN 14441
This slotted hexagonal-head nut, M8, DIN 14441 is copper plated and is commonly used for rudder fixation.from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Felt ring for 14 c6 bearing
Thesef felt rings measure 20x10 mm and are 3 mm thick. They are designed for 14 C6 bearings.
Please note that a thinner model (L07-0594) is used for 10 C6 bearings.
from 1 € 0.24 incl. 19% VAT
€ 0.20 -
Shim washer 0,3 mm for 18 mm wing bolt
This washer is used to adjust the distance between the wing and the fuselage. It is 0.3 mm thick.
They fit an 18 mm wing bolt, including both the front and rear bolts at the wing root of two-seater aircraft.
The washers have an internal diameter of 17.8 mm. They are slightly smaller than the bolt to ensure they stay in place when installed.
A kit containing eight washers with a thickness of 0.5 mm and four washers with a thickness of 0.8 mm is also available.
from 1 € 1.32 incl. 19% VAT
€ 1.11 -
Washer disc 3,2, DIN 9021 / ISO 7093-1 galvanized
This is a 3,2 washer DIN 9021 / ISO 7093-1 galvanized.from 1 € 0.24 incl. 19% VAT
€ 0.20
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.