Controls
-
Bellow V6-0714 for the elevator drive
This rubber boot surrounds the upper part of the elevator rope.
It is 70 mm long and 75 mm large and the diameters of the openings are 65 and 18 mm.
from 1 € 38.48 incl. 19% VAT
€ 32.34 -
Set of gaskets for main brake cylinder, Form 6, 7
This set of gasket can replace the on the main brake cylinder form 6 or 7. It is very likely that this type of cylinder is installed in the Duo Discus (but not in the x or xL), some Nimbus-4(D), as well as in some retrofitted Nimbus and Janus.
It do not work with the rectangular brake cylinder installed on some gliders (Ref: B40-1014).
from 1 € 37.83 incl. 19% VAT
€ 31.79 -
Outer water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 outer wing.
The plug used for the inner wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 27.75 incl. 19% VAT
€ 23.32 -
Springs for wingtip aileron of the Duo Discus and the Ventus-2
This pair of springs is used for the outer wing panel aileron of the Duo Discus and Ventus-2. Is it sold with the roll pins used to secure the aileron.
The diameter of the spring leg is 1,5 mm and it makes 1 full coiled.
On the Duo Discus xL, these springs are 2 mm and is making 2 full coiled. Other gliders needs other models, you can order them through the spare part online form.
from 1 € 25.81 incl. 19% VAT
€ 21.69 -
Rod end bearing 14c6, M8 x 58
Rod end bearing with a 14c6 head and M8 x 58 length body.
Other rod end bearings are used in our gliders. If you are not sure which one you need. Please contact the Spare Part team.
from 1 € 25.14 incl. 19% VAT
€ 21.13 -
Polyflex-hose Type 2010N for Duo Discus xL Brakes (Magura system)
This hose is 2200 mm long.
It is used for the Duo Discus x und xL as well as the first Arcus which are using the 5" Classic wheels from TOST with a Magura cylinder brake.
Please note, this cable is not compatible with the first-generation Duo Discus or the Arcus edition 2020, which are equipped, respectively, with master cylinder model 7 / brakes 30-9 and the BZT2 TOST brake system.
from 1 € 23.82 incl. 19% VAT
€ 20.02 -
Elevator-trim raster for all Duo Discus, Arcus and all Nimbus-4D
This threaded rod is M8 and 186mm long.
It is use for the trim of the Duo Discus, Duo Discus xL, Arcus, Nimbus-4D and Nimbus-4DL. The system on the Arcus edition 2020 is different.
from 1 € 23.80 incl. 19% VAT
€ 20.00 -
Inner and middle water filler cap for Ventus-3
This sealing cap is made for the Ventus-3 inner wing.
The plug used for the outer wing is different. You can find it below in the suggested items.
Please note that the first seven Ventus-3 are equipped with a different system.
from 1 € 22.24 incl. 19% VAT
€ 18.69 -
Bellow V6-269 for water ballast control rod
This rubber boot is surrounding the water ballast control rod to avoid the water leaking through. It is used in several Schempp-Hirth gliders including the Nimbus-2, Ventus, Ventus-2c, Discus-2c, Duo Discus and the Arcus.
It is 125 x 22 x 22 mm with a 7 mm and a 16 mm opening.
Over the years, other bellows and different combinations have been used. You can find them underneath this description, in the "suggested products", if you want to compare them with the model that you wish to replace.
from 1 € 21.74 incl. 19% VAT
€ 18.27
Help, my spare part is not yet in the shop!
If you cannot find the item you want please use the spare-part form and we will come back to you shortly.